Catalogs >
Lohmann >
DuploCOLL® 92011 G

DuploCOLL® 92011 G
2Pages

Catalog excerpts

Double-sided foam tape with special developed adhesive system for bonding on glass without pre-treatment (Activator) Product construction Name Polyethylene paper Adhesive covered side Special adhesive Polyethylene foam Adhesive open side Pure acrylic Total thickness: approx. 1,26 Product advantages • The special developed adhesive system on the covered side enables a bonding on glass without pre-treatment (Activator). • The pure acrylic adhesive on the open side is characterized by a very good final adhesion and an excellent resistance against temperature, UV and weathering. • DuploCOLL® 92011 G with its compressible foam carrier is better in compensating component tolerances than hard foamed systems. The better surface wetting results in better adhesion. • The permanently elastic polyethylene foam allows the compensation of linear expansions due to different thermal coefficient of expansion of the substrates. Main application fields • Bonding of emblems, letterings and add-on parts on glass Specific technical data* Temperature range * Specific test results, statistically not approved.

Open the catalog to page 1

Double-sided foam tape with special developed adhesive system for bonding on glass without pre-treatment (Activator) Technical Data Shear strength on steel according to DIN EN 1943, edition 1996, at +23 °C +/- 2°C open side 40 N/625mm² covered side 80 N/625mm² Peel strength on steel according to DIN EN 1939, edition 1996, at +23 °C +/- 2°C open side on glass according to DIN EN 1939, edition 1996, at +23 °C +/- 2°C Application Recommended application temperature Application guidelines Storage The shelf life at room temperature (15-25°C) and normal humidity (50-70 %). is 6 months after...

Open the catalog to page 2

DuploCOLL® 92011 G 2Pages

Catalog excerpts

All Lohmann catalogs and technical brochures

DuploCOLL® 92011 G
2Pages