Double-sided foam tape with special developed adhesive system for bonding on glass without pre-treatment (Activator) Product construction Name Polyethylene paper Adhesive covered side Special adhesive Polyethylene foam Adhesive open side Pure acrylic Total thickness: approx. 0,94 Product advantages • The special developed adhesive system on the covered side enables a bonding on glass without pre-treatment (Acitvator). • The pure acrylic adhesive on the open side is characterized by a very good final adhesion and an excellent resistance against temperature, UV and weathering. • DuploCOLL® 92008 G with its compressible foam carrier is better in compensating component tolerances than hard foamed systems. The better surface wetting results in better adhesion. • The permanently elastic polyethylene foam allows the compensation of linear expansions due to different thermal coefficient of expansion of the substrates. Main application fields • Bonding of emblems, letterings and add-on parts on glass Specific technical data* Temperature range * Specific test results, statistically not approved.

Double-sided foam tape with special developed adhesive system for bonding on glass without pre-treatment (Activator) Technical Data Shear strength on steel according to DIN EN 1943, edition 1996, at +23 °C +/- 2°C open side covered side Peel strength on steel according to DIN EN 1939, edition 1996, at +23 °C +/- 2°C open side covered side on glass according to DIN EN 1939, edition 1996, at +23 °C +/- 2°C covered side Application Recommended application temperature Application guidelines Storage The shelf life at room temperature (15-25°C) and normal humidity (50-70%) is 6 months after delivery....