Adhesive bonding on coated wood Extension of the ift-standard VE-08/4. .JLohmann The Bonding Engineers

RC 2 „resistance class“ Break-in resistance for private housing — with adhesive tape at the glass stop. Why bonding? • Uniform transfer of loads within the frame construction • Increased dimensional stability for large formats as well as narrow and high elements • Discharge of frame corners, fitting components and insulating glass What are the testing options for window elements? • After the evaluation of over 6000 specimen, standard VE 08/4 could be complemented by part 5 „Extention of part 1 — bonding on coated wood“ • Now, after about two years of development, testing according to the ift-standard...

• Bonding and sealing with just one tape (e.g. wood / aluminum elements no longer require interior wet sealing) • High initial tack • Resistance against UV-light, aging, weather, plastisizers and cleaning agents • DuploTEC® Cleaner U for cleaning surfaces (1l container) • Hand applicator for a perfect and easy application of the tape • Remove stains on the glass fringes, e.g. with a glass scraper • Clean the glass surface with DuploTEC® Cleaner U • Clean the coated wooden surface by means of our DuploTEC® Cleaner U • Easy application of the adhesive tape with our Lohmann hand applicator • Remove...

Processing procedure Information on the processing of wooden profiles. Remove stains on the glass fringes, e.g. with a glass scraper Clean the glass surface with DuploTEC® Cleaner U Clean the coated wooden surface to be bonded with DuploTEC®-Cleaner DuploCOLL® 56053 / 56055 means of the hand applicator Corner design can be butt jointed, miter or slightly offset 6. * Insert an additional sealant point Press on the adhesive tape with the help of a pressure roller Remove liner Position glazing blocks correctly 10. Insert glass pane 11. Push in the glazing blocks 12. Mount glass strips 8.1 Loosen...