PRECISION JIGS RANGE Logitech jig’s are precision engineered to hold a diverse range of sample sizes across various applications throughout the lapping and polishing process.

PRECISION LAPPING & POLISHING JIGS Logitech’s wide range of precision jigs are used to hold a diverse range of sample sizes and material types during lapping and / or polishing. These jigs allow precise control of the sample orientation and fine adjustment of the load applied during processing. Logitech jigs are precision made and hand finished to ensure the highest levels of accuracy. Sample retention is possible through either mechanical fixing, direct wax mounting or vacuum. Precise control: Logitech's wide range of precision jigs are used to hold a diverse range of sample sizes and materials...

JIG SPECIFICATIONS Jig with vacuum chuckface PRECISION JIGS Outside diameter of chuckface Total thickness variation (TTV) of sample post process Range of jig loads applied to samples Angular adjustment range Total jig mass Jigs can be customisable for specific sample dimensions. PP5 and PP6 Jigs can be supplied with extended legs to accommodate thicker/longer samples. An extra load of 7kg can also be applied. KEY JIG INFORMATION Sample Alignment on Logitech Jigs All Logitech PP series precision jigs have easy to read digital dial gauges with the option for Bluetooth capability. Bluetooth capabilities...

Logitech developed a highly advanced precision jig for our highly automated, stand alone lapping & polishing system - Akribis-air. The free rotational intelligent jig delivers the ultimate in sample preparation due to increase load capacity and accuracy of control. The jig load can be accurately set to meet the need of the application, in the range of 0.5kg - 12kg for the AJ100 (100mm jig) and 0.5kg - 21.6kg for AJ150 (150mm) jig. The use of air pressure allows the maximum sample load to be increased, using the load mass of the full jig assembly. The load is controlled through the software interface...

LAPPING JIGS Logitech PLJ Precision Lapping Jigs are used to hold multiple “wafer geometry” or slide mounted specimens, while they are being processed on a Logitech lapping machine such as the PM6 or LP70. The jigs allow specimens to be lapped with a high degree of parallelism. The different jig chuckfaces enable you to hold a wide variety of specimen sizes, to meet the needs of your particular application. PLJ2 and PLJ7 jigs can be used for a variety of applications where the requirement is to produce a highly uniform specimen with a precisely controlled final thickness. Due to their robust...

Logitech Ltd Erskine Ferry Road Old Kilpatrick Glasgow, G60 5EU United Kingdom Tel: +44 (0) 1389 875 444 Email: [email protected] Web: logitech.uk.com