Semi-automatic machine for leak testing in water. Manual loading of the piece into the machine, cycle start by the operator. Automatic clamping closing, piece air inlet, piece descent into the water for visual check by the operator of air leaks. Return of the piece to the surface, opening of the fixtures and removal of the piece by the operator.

MACHINE SIZE

Maximum power installed: 0.25 kW Supply voltage: 220Vac Auxiliary power supply voltage: 24Vdc Phases: 1 + Neutral + Earth Frequency: 50/60Hz Pneumatic supply pressure: 6 Bar (max 8 Bar) Total machine weight: 650 Kg Bath water mass: 170 Kg max.

MECHANICAL FIXTURE TO HOLD THE PRODUCT IN TEST

Semi-automatic machine for leak testing in water. Manual loading of the piece into the piece housing mechanical parts, start of the cycle by the operator. Automatic closing of the clamps, piece air inlet, piece descent into the water for visual check by the operator of air leaks. The operator can rotate manually the piece while it is in the tank. Return of the piece to the surface, opening of the fixtures and piece manual remove by the operator.

Height [m] approx. 2.00 Depth [m] approx. 1.50 Width [m] approx. 1.82 Total power installed 0.5 kW Supply voltage 220 Vac Frequency 50 Hz Input cable section (1 phase, neutral + hearth) Water tank dimension [m] 1.25Wx0.45Dx0.6H Water volume [m3] 0.3 Empty tank weight [kg] approx. 500 Maximum working pressure [bar] 6 Maximum pneumatic pressure [bar] 8