- Catalogs
- LOGITECH AUTOMAZIONE SRL
- Bell helium test #19
Bell helium test #19
Bell helium test #19
- Component Loading: Can be performed in automatic or manual mode depending on the selected cycle type.
- Table Rotation and Test Cycle Start: Initiates the automatic test cycle.
- Component Locking: Secures the component for testing.
- Pressurization: Helium is used to pressurize the component up to a predetermined pressure.
- Leakage Calculation: Determines the real leakage of the component.
- Test Result: Provides the outcome of the test.
- Helium Discharge and Ventilation: Helium is discharged into its storage system, and air is introduced into the component.
- Component Unlocking: The component is unlocked post-test.
- Component Unloading: Can be performed in automatic or manual mode depending on the selected cycle type.
- Dimensions: Height: approx. 2.50 m, Depth: approx. 2.50 m, Width: approx. 3.50 m.
- Power: Total power installed is 7.50 kW.
- Voltage: Supply voltage is 220/380Vac with an auxiliary power supply voltage of 24Vdc.
- Phases: 3 + Neutral + Earth.
- Frequency: 50Hz.
- Pneumatic Supply Pressure: 200 Bar.
- Weight: Total machine weight is approx. 1250 Kg.
Catalog excerpts
BELL HELIUM TEST
Open the catalog to page 2
MACHINE CYCLE 1- Component loading (in automatic or in manual mode according to the type of cycle selected) 2- Table rotation and start of the automatic test cycle 3- Locking of the component under test 4- Pressurization with helium up to the pressure set 5- Calculation of the component real leakage 6- Test result 7- Helium discharge into its storage system and air inlet into the component (ventilation) 8- Unlocking of the component after test 9- Component unloading (in automatic or manual mode according to the type of cycle selected)
Open the catalog to page 3
Height: approx. 2.50 m Depth: approx. 2.50 m Width: approx. 3.50 m Total power installed: 7.50 kW Supply voltage: 220/380Vac Auxiliary power supply voltage: 24Vdc Phases: 3 + Neutral + Earth Frequency: 50Hz Pneumatic supply pressure: 200 Bar Total machine weight: approx. 1250 Kg
Open the catalog to page 5All LOGITECH AUTOMAZIONE SRL catalogs and technical brochures
Leak test in water #688 Pages
Teflon coating and drying #12014 Pages
Cylinder lock making machine #8511 Pages
Leak test stand #015 Pages
- Test machine
- Test stand
- Automated testing machine
- Making machine
- Volumetric dosing unit
- Liquids dispensing system
- Automated production line
- Industrial testing machine
- Automated test bench
- Precision testing machine
- Automatic dispensing system
- Quality control testing machine
- Industrial test bench
- Pressure test bench
- Protective coating
- Testing machine for the automotive industry
- Valve test bench
- Mechanical testing machine
- Manual test station
- High-precision dosing unit