DATA SHEET RAMP SOLUTIONS Lodige Dock Lifts STANDARD SPECIFICATION The dock lift has a high edge load capacity and directional stability. Scissor arms cut from stainless steel are warp resistant and create a sturdy frame. Hydraulic cylinders are made from a seamless steel tube with a stop, inset with a piston rod. The hydraulic unit is mounted in the base frame completely wired and cased. Upward and downward movement is controlled by the operator using a pendant control panel. The platform is finished with a high abrasion resistant and anti-skid coating. The dock lift is sand blasted and finished with primer and lacquer to protect against corrosion. OPTIONS: Galvanized version Separate / additional control panels Railings (fixed) Gates Ramps (with gas spring or hydraulic cylinder) Safety trip bar Chain mail skirt / Bellows Roll-off protection on the edge Detachable ladder Pit angles and pit frames TECHNICAL DATA: PLATFORM SIZE [MM] NAME LIFTING COLLAPSED CAPACITY HEIGHT [MM] HEIGHT [MM] [KG] Dock Lifts Lödige Industries GmbH | Wilhelm-Lödige-Str. 1 | 34414 Warburg Telephone: 05642 702-0 | Fax: 05642 702-111 | E-mail: [email protected]

DATA SHEET RAMP SOLUTIONS Lodige Dock Lifts DOCK LIFT COMPONENTS: Goal Post Railing Gate Platform Fixed bearing Hydralic cylinder Loose bearing Hydralic Power Pack Base frame SAFETY FEATURES: Tilting maintenance struts ensure that work underneath the platform is safe A limit switch disables the motor when the end limit position at the top of the dock loader is achieved The platform rests on a rubber buffer attached to the base frame in the lowered position An emergency lowering valve lowers the platform to the collapsed position Emergency stop switch on the pendant control panel halts all movement...