DETAILS FEATURES Dual-axis capacitive acceleration sensors, type AXXYE2, utilize a variable capacitive MEMS sensitive element. The sensitive element consists of a very small inertial mass and a flexure element. The mass is deflected under acceleration and the capacitance changes. The internal circuitry inside the sensor contains AC excitation and modulation-demodulation circuits that output an analog voltage signal proportional to the acceleration. The sensitive element and circuitry are encapsulated within a titanium alloy housing with an optional conjoined eight-conductor cable or 5/16-32 nine-conductor connector, and signal ground isolated from the housing. •Zero frequency voltage output type •Low power consumption, low noise, high resolution • Connected cable output • Broadband response TYPICAL APPLICATIONS ■ Road spectrum testing • Overload testing •Foundation building structure testing Fig_3 Typical Frequency Response Fig_2 Typical Temperature Response

MODEL NUMBER -Lf*3Additional InformationNote: 1. @ 160Hz, under the condition of 23 °C± 5 °C 2. JBT 6822-2018 7.12.1 Vibration Testing Method 4. It refers to the mechanical structure of the sensor not being damaged in a non powered state, rather than in a working state Supplied Accessories: • Product Verification Report • Install screws Qilu High-Tech District, Qihe.Dezhou Shandong Province, China 251100 +86-534-2150417 9620 NE Tanasbourne Dr Ste 300 Hillsboro, OR, USA 97124 +1-503-208-5512 [email protected]