Universal Testing Type Accelerometer DETAILS FEATURES The single-axis capacitive acceleration sensor type AXXD06 utilizes a variable capacitive MEMS sensitive element The sensitive element consists of a very small inertial mass and a flexure element. The mass is deflected under acceleration and the capacitance changes. The AC excitation and modulation-demodulation circuitry contained within the internal internal circuitry of the sensor outputs an analog output voltage signal proportional to the acceleration. Sensitive components and circuitry are encapsulated within a titanium alloy housing, 1/4-28 four-prong connector output, and signal ground is isolated from the housing. Withstands 10,000g shock. •Zero frequency voltage output type • Large range, wide frequency response, high shock resistance •Low power consumption, low noise, high resolution TYPICAL APPLICATIONS • Road spectrum testing • Overload testing ■Foundation building structure testing Fig_2 Typical Temperature Response Fig_3 Typical Frequency Response

Specif ications-AXXD06 Additional Information MODEL NUMBER Note:1. @ 160Hz, under the condition of23 °C± 5 °C2. JBT 6822-2018 7.12.1 Vibration Testing Method 3. Typical values 4. It refers to the mechanical structure of the sensor not being damaged in a non powered state, rather than in a working state Supplied Accessories: • Product Verification Report • Install screws Qilu High-Tech District, Qihe,Dezhou Shandong Province, China 251100 +86-534-2150417 International: 9620 NE Tanasbourne Dr Ste 300 Hillsboro, OR, USA 97124 +1-503-208-5512 [email protected]