MultiFace H45 PRO4 & P45 PRO8 Brochure
MultiFace H45 PRO4 & P45 PRO8 Brochure
The document introduces the MultiFace H45 PRO4 and P45 PRO8, advanced face milling systems by LMT Fette, designed for efficient machining of modern materials. These systems are noted for their smooth cutting capabilities and cost-effectiveness, suitable for applications ranging from roughing to finishing across various materials.
- MultiFace H45 PRO4: Features a 20° axial angle for reduced machining forces, allowing a depth of cut up to 6 mm with inserts usable four times. Suitable for machining ISO-P, ISO-K, ISO-M, ISO-S, and ISO-N materials.
- MultiFace P45 PRO8: Offers a 15° axial angle, supporting a depth of cut up to 4 mm with inserts usable eight times, reducing cost per cutting edge. Designed for ISO-P, ISO-K, ISO-M, and ISO-S materials.
The systems are available in diameters ranging from 50 to 160 mm, with options for normal and fine pitches.
Various insert geometries are available, including:
- SEKT 1204AF-SN: Stable geometry for challenging conditions.
- SEKT 1204AFEN-BM: Soft-cutting geometry for reduced machining forces.
- SEKT 1204AFSN-BMS: Universal geometry for a wide range of applications.
- SEHT 1204AFFN-ALC: Designed for aluminum machining with polished surfaces.
Starting values for cutting data are provided, which should be adjusted based on specific conditions. Recommendations include various materials such as plain carbon steel, stainless steel, cast iron, aluminum alloys, and titanium alloys.
Examples of performance improvements include reduced spindle load, increased chipping volume, and extended tool life, demonstrating the systems' efficiency in different machining scenarios.
The MultiFace H45 PRO4 and P45 PRO8 systems offer versatile and efficient solutions for face milling, accommodating a wide range of materials and machining conditions, thereby enhancing productivity and reducing costs.
The document provides technical specifications and recommendations for dry machining using air-blast cooling, focusing on various carbide grades and their respective machining parameters.
- LCP40M and LCPK30M: Suitable for both roughing and finishing. Roughing speeds range from 150–250 m/min with a feed per tooth (fz) of 0.20–0.40 mm/min. Finishing speeds range from 180–320 m/min with fz of 0.08–0.20 mm/z.
- LCM45M and LCMS35M: Used for lower speed applications. Roughing speeds range from 60–120 m/min with fz of 0.15–0.40 mm/min. Finishing speeds range from 80–240 m/min with fz of 0.05–0.15 mm/z.
- LCKP10M: Offers a wide range of speeds for both roughing and finishing, with roughing speeds from 100–240 m/min and finishing speeds from 160–260 m/min.
- LCN10M and LWN10M: High-speed applications with roughing speeds up to 1000 m/min and finishing speeds up to 500 m/min.
- Dry machining with air-blast cooling is advantageous for these carbide grades.
- Specific speed and feed parameters are provided for different machining operations (roughing and finishing) to optimize performance.
For further assistance, contact LMT Tools and their experts via their website: www.lmt-tools.com.
Catalog excerpts
MultiFace H45 PRO4 & P45 PRO8 Weichschneidende Planfrässysteme für wirtschaftliche Prozesse Smooth cutting face milling systems for cost-effective processes
Open the catalog to page 1
MultiFace H45 PRO4 & P45 PRO8 Weichschneidende Planfrässysteme für wirtschaftliche Prozesse Smooth cutting face milling systems for cost-effective processes Die wirtschaftliche Zerspanung von modernen Werkstoffen stellt immer komplexere Anforderungen an die Werkzeugsysteme. Mit dem MultiFace H45 PRO4 und dem MultiFace P45 PRO8 erweitert LMT Fette daher sein Produktprogramm um zwei leistungsfähige und wirtschaftliche Planfrässysteme. The economical machining of modern materials puts more and more complex requirements on the machining tools. With the MultiFace H45 PRO4 and the MultiFace P45 PRO8,...
Open the catalog to page 2
MultiFace H45 PRO4 Aufsteckausfuhrung Arbor type ▼ IC 0 50-125 mm Cutting data recommendations on page 10 Wendeplatte Insert: SEHT 1204AFEN-ALC in LWN10M (Ident No. 7251435) Reduzierte Spindellast ermoglicht Nutzung eines groBeren Werkzeugdurchmessers. Doppeltes Zeitspanvolumen und 50 % hoherer Standzeit. Reduced spindle load enables use of bigger diameter. Doubled Chipping volume and 50 % longer tool life.
Open the catalog to page 3
MultiFace H45 PRO4 Wendeschneidplatten-Geometrien Insert geometries Merkmale: ■ Hochste Schneidkantenstabilitat ■ Negative Schutzfase mit Schneidkantenverrundung ■ Very stable geometry ■ Negative chamfer with edge preparation SEKT 1204AF-SN SEKT 1204AFEN-BM Merkmale: ■ Leichtschneidende Geometrie zur Reduzierung der Zerspankrafte ■ Additional 8° chipping angle with edge preparation SEKT 1204AFSN-BMS Merkmale: ■ Universelle Geometrie fur ein breites Anwendungsfeld ■ 15° Spanwinkel und negative Schutzfase mit Schneidkantenverrundung ■ Additional 15° chipping angle with edge preparation ■ Geschliffene...
Open the catalog to page 4
MultiFace H45 PRO4 Wendeschneidplatten Indexable inserts ISO-Code SEKT 1204 AFSN N = Anzahl der Schneidkanten N = Number of cutting edges Schneidstoffsorten Cutting materials Ident No. Für Fräser For cutter Cat-No. FMH45 N=4 ◼ = Hauptanwendung First choice ◻ = Nebenanwendung Alternative
Open the catalog to page 5
Weitere Anwendungsempfehlungen Further instructions for use Tauchfrasen Tmax: innere Schnitttiefe inner cutting depth Planfrasoperation Warmetauscher Face milling opperation on heat-exchenger Werkstoff Material: Austenitischer Cr-Ni-Stahl Austenitic Cr-Ni-Steel (1.4301; ~700 N/mm2 ) Wendeplatte Insert: Ergebnis Result: Um 33 % hoheres Zeitspanvolumen bei 25 % hoherer Standzeit. Increased chipping volume by 33 % and 25 % higher tool life.
Open the catalog to page 6
MultiFace P45 PRO8 Aufsteckausfuhrung Arbor type II 11 IK 0 50-125 mm Cutting data recommendations starting page 10 Werkzeug Tool: MultiFace P45 PRO8 (Ident No. 7220267) Kaltarbeitsstahl Cold work steel (1.2842; ~1000 N/mm2) Um 30 % hoheres Zeitspanvolumen bei 50 % hoherer Standzeit. Increased chipping volume by 30 % and 50 % higher tool life.
Open the catalog to page 7
MultiFace P45 PRO8 Wendeschneidplatten-Geometrien Insert geometries Merkmale: ■ Negative Schutzfase mit Schneidkantenverrundung ■ Very stable geometry ■ Negative chamfer with edge preparation ■ Leichtschneidende Geometrie zur Reduzierung der Zerspankrafte ■ Additional 8° chipping angle with edge preparation ■ Universelle Geometrie fur ein breites Anwendungsfeld ■ 15° Spanwinkel und negative Schutzfase mit Schneidkantenverrundung ■ Additional 15° chipping angle with edge preparation
Open the catalog to page 8
MultiFace P45 PRO8 Wendeschneidplatten Indexable inserts ISO-Code OEKT 0605 AESN N = Anzahl der Schneidkanten N = Number of cutting edges Schneidstoffsorten Cutting materials Ident No. Für Fräser For cutter Cat-No. FMP45 N=8 ◼ = Hauptanwendung First choice ◻ = Nebenanwendung Alternative
Open the catalog to page 9
Die angegebenen Schnittwerte sind Startwerte und mussen auf die vorhandenen Bedingungen abgestimmt werden. The cutting data indicated are starting values and must be adjusted to the prevailing conditions.
Open the catalog to page 10
Vorschub pro Zahn Feed per tooth fz (mm/min) Schruppen Roughing Schlichten Finishing + HM-Sorte Carbide grade LCP40M LCPK30M
Open the catalog to page 11
We are committed to you worldwide! Contact us and our experts: www.lmt-tools.com Wir sind weltweit für Sie da! Nehmen Sie Kontakt zu uns und unseren Experten auf: www.lmt-tools.com
Open the catalog to page 12All LMT Tools catalogs and technical brochures
PCD Tools Brochure4 Pages
ChamferCut Brochure6 Pages
Rasant Steel Brochure12 Pages
UNIFY Brochure3 Pages
SpeedCore Hobs Brochure6 Pages
CopyMax Brochure12 Pages
Nanomold Red Brochure4 Pages
SuperFinish Brochure4 Pages
Gear Cutting Experts Brochure12 Pages
LMT Belin Milling Catalog38 Pages
Indexable Mills Catalog302 Pages
End Mills Catalog154 Pages
Univex Premium Brochure20 Pages
GearSkiving Brochure6 Pages
T3.18 EVO Brochure12 Pages
HFC – High Feed Cutter Brochure20 Pages
EASYMill Brochure8 Pages
FinishLine Premium Brochure12 Pages
EASYDrill EASYReam Brochure32 Pages
EASYTap Brochure24 Pages
Automotive Brochure15 Pages
- LMT Tools milling cutter
- LMT Tools solid milling cutter
- Drilling tool
- LMT Tools steel milling cutter
- LMT Tools insert milling cutter
- Solid drill bit
- Metal milling cutter
- LMT Tools clamping milling cutter
- LMT Tools milling cutter with cylindrical shank
- Grade
- End mill
- Cast iron milling cutter
- Face milling cutter
- LMT Tools shell-end milling cutter
- Solid carbide milling cutter
- LMT Tools indexable insert milling cutter
- Ball nose milling cutter
- Multi-purpose drilling tool
- Cutting milling cutter
- Corner radius milling cutter