EASYMill Brochure

Product catalog summary

Overview: The EASYMill is a versatile endmill designed for universal application across various milling operations such as roughing, finishing, slotting, ramping, and helical plunging. It is particularly effective for use in steel and stainless steel materials, offering high efficiency and ease of handling.

Key Features:

Optimized coating for steel and stainless steel.
Neck relief and cylindrical shank options.
Increased stability through reinforced back and different helix angles.
Positive cutting edge geometry suitable for ISO P and ISO M class steels.
Adapted sharp cutting edge to prevent chip build-up and tool breakage.

Specifications:

Suitable for low-alloy, medium-alloy, and stainless steels with malleable strength of 300–900 N/mm².
Available in various sizes with specific cutting data recommendations.

Cutting Data Recommendations:

Dry machining with air-blast cooling is advantageous; wet machining requires sufficient emulsion volume.
Specific cutting speeds and feed per tooth values are provided for different diameters and materials.

Technical Details:

Includes calculation formulas for speed and feed rate.
Feed correction factors based on width and depth of cut.
Plunge angle specifications for ramping and helix milling.

Additional Information: The document includes a detailed table of product codes and dimensions, along with cutting speed and feed per tooth data for various diameters. The publication is produced by LMT Tools Global Operations GmbH & Co. KG, with design by deckermedia GbR.

Catalog excerpts

EASYMillThe New Universal Endmill www.lmt-tools.com

Open the catalog to page 1

The product range for highest efficiency and universal application. Easy to handle.

Open the catalog to page 2

Stainless Steel One Milling Cutter, Full Flexibility For All Milling Operations With the EASYMill, all common milling operations can be perfectly covered, such as roughing, finishing, slotting, ramping or helical plunging. The EASYMill can efficiently be used in steel and stainless steel materials. Corner Milling Contour Milling Pocket Milling Circular Milling

Open the catalog to page 3

The Universal Endmill for Low-Alloy, Medium-Alloy and Stainless Steels With its geometry perfectly optimized for steel and stainless steel, the EASYMill cuts through all materials without any problems. Cutting pressure and cutting forces are effectively reduced by the unequal helix pitch. This makes the EASYMill ideally suited for use on turning-milling machines. Cylindrical shank – with and without clamping surface Neck relief Coating optimised for steel and stainless steel Different helix angles Increased stability through reinforcement of the „back“ Positive cutting edge geometry, for soft...

Open the catalog to page 4

LMT-TOOLS KIENINGER

Open the catalog to page 5

air-blast cooling is advantageous ^ sufficient emulsion volume required Feed rate vf (mm/min): ae = Width of cut in mm ap = Depth of cut in mm d-i = Cutter diameter in mm f = Correction factor for vf fz = Feed per tooth in mm n = Speed in min-1 vf = Feed rate in mm/min z = No. of teeth

Open the catalog to page 6

Cutting speed The cutting data above are starting values and must be adjusted to the existing conditions. Plunge angle a for ramping and helix milling Publication details Publisher: LMT Tools Global Operations GmbH & Co. KG, Vogesenstrasse 23, 77933 Lahr, Germany, Phone: +49 78 21 943-0 Responsible for the content: Norman Winter, LMT Tool Systems GmbH & Co. KG Design: deckermedia GbR, Rostock Printing: Druckerei Weidner GmbH, Rostock © LMT Tools Global Operations GmbH & Co. KG This publication may not be reprinted in whole or part without our express permission. All right reserved. No rights...

Open the catalog to page 7