Concepteur Fabricant Designer Manufacturer SOUNDPROOFING COVER Soundproofing cover for matrix printers Characteristics: • he enclosure body consists of a single thermoplastic unit so that T the rear and sides form part of the same structure; • Panels made from 10 mm thick composite material, dyed in the mass; • Base made from 19 mm thick composite material and 3 mm thick foam; • coustic foam 25 mm thick on the cover walls to A reduce noise from the printer by up to 50 %; • oam and walls of fire rating M1 CSTB-ULV 94 USA, they are self-extinguishing and F comply with NE-CEE electricity standards. Side: • Fan with grille and filter to extract hot air; • he computer hardware is powered up when the enclosure (fan) is switched on T via a switch on the front. Rear and base: • Opening for paper feed and exit: in the rear and in the base; • Socket for cover power supply at the rear; • Plugs for unused openings. Front panel: Handling: • Access to printer controls from the front; • mm thick transparent PMMA thermoformed cover mounted on 6 polyamide hinges, opening assisted by gas springs; • over closes against seals. C • Physical and secure protection • Optimum noise reduction • Suitable for all types of matrix printer SOUNDPROOFING COVER with SC 1 STAND option > lease contact us to find out P which of our soundproofing covers are suitable for your printer SOUNDPROOFING COVER DIMENSIONS in mm: Reference • Stand for soundproofing cover, RAL 7035 grey painted steel. SOUNDPROOFING COVER open with view of the paper ou