Designer Manufacturer Concepteur Fabricant CPI 3 Industrial Protection Cabinet with three compartments Designed to house a complete computer workstation: LCD monitor, base unit, printer and keyboard Characteristics • The body consists of a single thermoplastic unit so that the front and sides are part of the same structure; • Access to both upper compartments via PMMA doors (transparent thermoplastic) - 6mm thick • 10 mm thick extruded composite panels; • 19 mm thick extruded composite panels for rear and floor of cabinet; • Smooth cabinet surfaces, no tight corners to facilitate cleaning and prevent the build-up of dust; • Cabinet can be attached to the wall (without supports). • Two ventilators with grilles and filters to cool the cabinet; • 80 mm cable gland in the right hand side panel; • The three compartments are independent: cables pass through an opening in the screen/printer shelf; • pper compartments protected by compression latches: PMMA doors held in place against a seal located within the U frame; Monitor & Base Unit compartment • Access is via door fitted with polyamide hinges Printer compartment • Access is via door fitted with polyamide hinges • liding shelf fitted to triple extending rails in stainless steel, capable of handling loads of up to 60 kg, allowing the S printer to be pulled fully free. Keyboard compartment • Access by flap in transparent 6 mm PMMA on two polyamide hinges; • Latch closure; • PVC 19mm extending shelf on two stainless steel, double extending slides. • Ergonomically designed cabinet • Reduced footprint • Permanent protection CPI 3 DIMENSIONS (mm): External dimensions Internal (screen/base unit) Internal (keyboard) Internal (printer) CPI with shelf for keyboard extended CPI 3 complete with sliding

Fixed and mobile workstations Concepteur Fabricant DESCRIPTION OF OPTIONS TAV L12 slot LABEL SLOT option • TAV: Inspection port in unbreakable polycarbonate Available in two sizes: • TAV L 12: W 220 x H 100 mm; • TAV L 24: W 220 x H 190 mm; Option KDL: • pening cable gland system designed to allow cables to be O connected without having to remove their end pieces; • The gable glands are in two sections which hold the cables in leaktight seals; • Usually fitted into one of the side walls of the cabinet. STAINLESS STEEL LEGS option • Painted steel in RAL 7035 grey; • Mechanically welded assembly....