*mydirectindustry

roll-slide mini

Product catalog summary

Specifications:
1. Model Sizes and Mounting: The document lists various model sizes with corresponding part numbers, number of mounting holes, and maximum stroke lengths. For example, the PCP/HLP 25 model has sizes ranging from 240mm to 1200mm with mounting holes from 3 to 15.
2. Load Ratings: The static and dynamic load ratings are provided for different load directions (Pa, Pb, Pc, Pd). For instance, the static load rating is 45 lbs for Pa and 22 lbs for Pb and Pc.
3. Service Temperature: The operating temperature range is specified as -50 to 140°F for imperial values and -10 to 50°C for metric values.

Procedures and Recommendations:
1. Lubrication: Rails should be lubricated with grease for high cycling applications, while no lubrication is needed for hand-actuated or low cycling uses.
2. Clearance: Initial clearance values are zero, but load-induced deformation may increase running clearances.

Advantages:
1. Low friction and smooth operation with super low resonance.
2. Quiet running and zero clearance due to factory preloaded operation.
3. Low profile, weight, and corrosion resistance.
4. Low magnetic signature.

Applications:
1. Camera sliders and sensor carriers.
2. Medical, bio-pharma, and food industries.
3. Defense and aerospace applications.
4. Manual adjustment mechanisms.

Additional Notes:
1. The document highlights the difference between sliding and rolling motion, noting the higher friction associated with sliding.
2. Part number generation is explained with an example: PCP/HLP 25 640, indicating system size and rail length.

Catalog excerpts

Smooth Motion Zero Clearance Motion Quiet Running Hand Stop Stainless Steel Construction

Open the catalog to page 1

Stainless Sealed Roller Bearings Knurled Stainless Mounting Holes Ball Bearings SECC - Electroless Nickel Plated Carrriage Plate Plastic Tipped Contact Plug Stainless Rail

Open the catalog to page 2

Part Number PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP PCP/HLP

Open the catalog to page 3

Imperial Values Size Load Direction Static Load Rating Dynamic Load Rating Clearance Service Temperature Metric Values Size Load Direction Static Load Rating Dynamic Load Rating Clearance Service Temperature * Capacity shown above is for 1 slider * Allowable Moment Load (N∙cm) = Load Rating x 30% (Reference Value) * Clearance Values are at the time of shipping * Load-induced deformation of ball bearings may increase running clearances

Open the catalog to page 4

Sliding vs. Rolling Motion Everyone's experienced frustration with sliding linear motion bearings and slides edge loading, crabbing and high breakaway friction when moment loads are <Slider Back Side> / High-Precision Miniature Ball Bearing Rolling Friction

Open the catalog to page 5

= Great all-weather camera slider for small, compact video cameras. 5

Open the catalog to page 6

Advantages: 1. Low Friction 2. Smooth - Super Low Resonance 3. Quiet Running 4. Zero Clearance - Factory Preloaded Operation 5. Low Profile and Weight 6. Corrosion Resistant 7. Low Magnetic Signature Applications: 1. Camera Sliders 2. Sensor Carriers 3. Medical, Bio-Pharma, Food 4. Defense - Aerospace 5. Manual Adjustment Mechanisms NOTES: 1. Rails should be lubricated with grease if application is high cycling 2. No lubrication is required if hand actuated or low cycling Part Number Generation PCP/HLP Plain or Hand Stop Plate System Size Rail Length

Open the catalog to page 7

All LM76 Linear Motion Bearings catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list