Catalogs >
LM REALISATIONS >
ZAG FROID DIRIGE - GRAND FROID

ZAG FROID DIRIGE - GRAND FROID
2Pages

Catalog excerpts

Concepteur Fabricant Designer Manufacturer Protective cabinet for large format thermal printers Designed for extreme cold use (temperatures of between 5°C and - 5 °C) Characteristics: • The body of the cabinet is a single, thermoplastic form, meaning the front face, side panels and rear are a single unit; • The body is a composite, through-coloured material, 19 mm thick, making it watertight; • The surface of the cabinet is smooth to facilitate cleaning and prevent the build-up of deposits; • Fitted with one thermostatically controlled 150 W convector fan heating system; • Printer raised up on two PVC mounts: one fitted with the two re-heating systems and the other used to allow the heat to circulate through the cabinet; • Connectivity: two standard cable glands (7 to 13 mm) to allow cables to enter the cabinet. Handling: • Side access to thermal printer; • Cabinet opening & closure: • Side panel folds down with stainless steel strengtheners, piano-style hinge and held shut using two latches; • Heat-formed cover with stainless steel strengtheners to improve the strength of the cover: • Cover closes against drop-down flap fitted with lip seals; • Fitted with piano-style hinges and held open by two pneumatic rams. Front panel: • Printer controls and labels accessed via the front panel using a composite fold-down flap; • Opening & closure controlled by compression locks. • Shock resistant • Optimum physical and thermal protection • uitable for large-sized thermal printers S in extreme cold conditions ZAG FD with HATCH & GUIDE option ZAG FD (view of heating system) Version ZAG GF available (temperatures of between -5°C et -30°C) with : • Two thermostatically controlled 150 W convector fan heating systems • Isulation provided by a 20 mm thick layer of STYROFOAM on the sides and base of the cabinets ZAG FD AND ZAG GF DIMENSIONS in mm : Overall external L 450 x P 760 x H 550 mm Usable internal

Open the catalog to page 1

Fixed andConcepteur Fabricant mobile workstations The protection system for large sized thermal printers • Legs in mechanically welded stainless steel - dimensions (mm): W 750 x D 440 x H 690; • Cabinet attached to upper frame. Slot INSPECTION PORT + GUIDE STAINLESS STEEL LEGS option LABEL SLOT option • SLOT: Cut into the PMMA flap on the front of the cabinet; LABEL SLOT + GUIDE: Cut into the PMMA flap on the front of the cabinet, with • a guide for easier label handling. designed cable gland system - allows cables to be passed into the • Specially cabinet without having to remove any...

Open the catalog to page 2