Catalog excerpts
Concepteur Fabricant Designer Manufacturer TGC Protective enclosure for large format thermal printers Characteristics: • The enclosure body consists of a single thermoplastic unit so that the front, side and rear are part of the same structure; • 10 mm thick composite walls, dyed in the mass, to protect and seal the enclosure; • Connections: 80 mm diameter cable port; VENTILATION: The ventilation and suction systems are used to: • Suck, filter and pressurise the inner volume; • ischarge air when opening the enclosure, which creates a barrier preventing dust from D entering. Left side: • Inlet grille equipped with filter to trap the dust. Rear panel: • An ECA (fan placed behind a grille with filter); • The computer hardware is powered up when the enclosure (fan) is switched on via a switch. Right side: Handling: • Side access to thermal printer; • Enclosure opening & closing: • Side panel folds down, fitted on piano hinge and closed with two latches; • Thermoformed cover with PVC strengthener to improve the strength of the panel: • Cover closes against drop-down flap fitted with lip seals; • Fitted with hinges and opening assisted by two gas springs. Front panel: • rinter controls and labels accessed via the front panel using a 6 mm thick PMMA (transparent P thermoplastic) fold-down flap; Shock resistant Optimum physical and thermal protection Suitable for thermal printerslarge format thermal printers Soundproofed version available: SOUNDPROOFING TGC TGC DIMENSIONS (mm): Overall outer dimensions Useful inner dimensions Inner view of the TGC: Ventilation grilles on the side and ECA with switch on the rear
Open the catalog to page 1Fixed andConcepteur Fabricant mobile workstations The protection system for large format thermal printers MONOBLOC STAND option MONOBLOC STAND option • RAL 7035 grey painted steel stand. Available in two sizes: • Height: 680 mm; • Height: 960 mm. • pecially designed cable gland system to feed cables without having to S remove the connectors; • he cable gland consists of two sections which hold the cables in place in the T seals. Slot LABEL SLOT + GUIDE LABEL SLOT options • ABEL SLOT + GUIDE: Slot in the PMMA flap on the front with a guide for easy handling L of labels; • TAV: Inspection...
Open the catalog to page 2All LM REALISATIONS catalogs and technical brochures
-
Lm Realisations brochure
4 Pages
-
PORTABLE ENERGY CASE
2 Pages
-
AGRO EC STAINLESS STEEL
1 Pages
-
SOUNDPROOFING TGC
2 Pages
-
EJB... Serie
10 Pages
-
GUB... Series
6 Pages
-
Moovi
4 Pages
-
KEYBOARDS & MICE
2 Pages
-
TV SCREEN PROTECTIVE CABINET
1 Pages
-
MOBICAR
2 Pages
-
MOBIRACK
2 Pages
-
LITHIUM ENERGY CABINET
2 Pages
-
AGM ENERGY CABINET
2 Pages
-
CPI
2 Pages
-
CPI 3
2 Pages
-
COFFRET RF EXT GF
1 Pages
-
MOBIRACK XL
2 Pages
-
ISS 1
2 Pages
-
SOUNDPROOFING COVER
1 Pages
-
CPUC RANGE
2 Pages
-
CABINET RF INT
1 Pages
-
MOBICAR XL
2 Pages
-
AIFixe
1 Pages
-
Moovicare
4 Pages
-
PORTABLE ENERGY CASE
2 Pages
-
AGRO EC STAINLESS STEEL
1 Pages
-
LOGIRACK LCD
2 Pages
-
LCD PROTECTION IP 44
1 Pages
-
LOGIPRINT
2 Pages
-
AGRO EC LCD
2 Pages
-
MU 3
2 Pages
-
AGRO GM
2 Pages
-
LCD PROTECTION ETANCHE IP 65
1 Pages
-
AL
2 Pages
-
MU 3 DOUBLE
2 Pages
-
CIT
2 Pages
-
MOBINOX
2 Pages
-
AGRO PM
2 Pages
-
MU3
2 Pages
-
ZAG
2 Pages