15 RPM x 100 : -25 LM Inr.trumonlntion TACH 30 DATCON INSTRUMENTS, SENDERS, SWITCHES AND PANELSFOR ENGINES

page 2 LM Instrumentation 2 rue Junon 44 470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr DASHBOARDS LM Instrumentation Dashboards LM Instrumentation develop and manufacture custom and standard dashboards Standard dashboards To “built in” 220 x 140 330 x 160 445 x 260

page 5 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr Complete panels sets Main control panel Machinery panel Harnesses

page 7 Maxima Technologies Clusters Maxima Technologies develop and manufacture clusters for OEM’s appliances (minimum quantity required). We can supply custom solutions and adjustable standards (limited development and investment) Universal Standard (minimum quantity required) Compatino Standard (minimum quantity required) Custom Cluster (minimum quantity required) LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr

page 8 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr ENGINE CONTROL MODULE MC 704 The MC 704 has been designed to suit extreme working conditions of mobile and stationary engines. This compact unit performs two critical cost saving functions: - it automatically shuts down the engine due to failure - it informs the operator what caused the malfunction via one of the four led’s Technical data • Dimensions: 72x72x110mm • Cut for flush mount: 66x66mm • Flange mount or panel mount • Rugged aluminium housing • Operating...

page 9 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr CANbus MULTI-FUNCTION DISPLAY CANtrak The CANtrak has established a new standard for intelligent, multi-function displays. The ideal man-machine interface, it is easily configured via the application of user-friendly software, to measure, display, store, process and transmit data. 2 versions available: • GEM (for monitoring J1939 and J1587 Engine Data) • 2600 OPEN Display features Large FSTN display, 160x128 pixels Adjustable contrast and backlight Soft function...

page 10 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr FOR YOUR ENGINE CANtrak GEM (Generic Engine Monitoring) Plug-and-go solution for the display of J1939 and J1587-transmitted engine and transmission data. The GEM offers user selectable icon based display layouts as well as including a comprehensive multi language text based fault warning and acknowledgement system. Key features Displayed data if received from the engine and transmission ECU’s: Electrical Fuel Distance Pressure Temperature Percentage Speed Time...

page 11 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr OPEN VERSION CANtrak 2600 CANtrak 2600 “OPEN” version is an ideal man-machine interface. It is easily configured via the application of user-friendly software, to measure, display, store, process and transmit data. Key features Micro Controller Siemens 164 16bit/20Mhz FLASH Memory : 512K bytes RAM : 128K bytes EEPROM: 128 bytes Communications: Full CAN 2.0B controller / port.RS232 / RS422. RS485 If needed we can also supply you a CANtrak Configurable Input...

page 12 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr DIRECT DATA-BUS INSTRUMENTS : DDBI DDBI (gauges, tachometers and speedometers) provides a direct connection to the SAE J1939 or J1708/1587 vehicle bus. No instrument controller or “gateway” required. Units can be individually connected to the bus or run in series. This architecture ensures easy installation and lower installed- system cost. General Features : • J1939 x J1708/1587 inputs • Reinforced plastic case • Integral 6 or 12 pin sealed Deutsch connectors...

page 13 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr • Tachometer 0-3500 RPM 12V P/N 30.5611 with LCD display (shows fault codes and 24V P/N 30.5612 various engine operating parameters, including hourmeter) • Diameter 86 mm • Oil pressure gauge 0-10 12V P/N 15.5616 Bars with integral led warning light 24V P/N 15.5615 (pre-set at 0.7 Bar) • Diameter 52 mm • Water temperature 12V P/N 14.5614 gauge 40-120°C with integral led warning light 24V P/N 14.5613 (pre-set at 105°C) • Diameter 52 mm Accessory : Deutsch 270mm...

Electronic Quartz Hourmeter P/N : 11.0264 • 52 mm diameter • Record to: 99.999,9 hours, operation warning light • Operating voltage: 10/32 VDC • Mounting ring • Water resistant front • Operating temperature: -40°C + 85°C • Electrical connections: 6.35 TAB Terminals page 14 LM Instrumentation 2 rue Junon 44470 CARQUEFOU - FRANCE Tél. : +33 2 40 18 51 00 Fax : +33 2 40 18 51 10 www.lminstrumentation.fr HOURMETERS Hourmeter with pointer • 52 mm diameter • Operating voltage : 10-80 VDC • Record to 99 999 hours • 1 pointer rotation = 1 hour •• Operating temerature: -40° + 80°C • Mounting by bracket...

LCD Hourmeter • 52 mm diameter • Record to: 99 999,9 hours • Operating voltage: 8/28 VDC • Operating temperature: -40°/ +85°C • 6 digits LCD display • Connection: 2 x 6.35mm tabs • Mounting by bracket P/N : 11.5365 Engine powered hourmeters Those hourmeters do work with W alternator or battery ignition signal input. • 52 mm diameter • Record to: 99 999,9 hours • Mounting by automatic bracket • Waterproof on front • Operating temperature –40/ +80 °C • Connection on 6.35mm tabs • Connection on Magneto Ignition P/N 11.3286 • • Connection on W alternator P/N 11.3340 page 15 LM Instrumentation 2 rue...