video corpo

TPSMD Series
6Pages

{{requestButtons}}

Catalog excerpts

TPSMD Series - 1

Expertise Applied | Answers Delivered TVS Diodes Surface Mount - 3000W > TPSMD series TPSMD Series I ft automotive grade i HF [rQhs TO po @ o—M—o Bi-directional Description The TPSMD series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Notes: 1. Non-repetitive current pulse per Fig. 4 and derated above TA = 25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31" (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle=4 per minute maximum. • Hi reliability application and automotive grade AEC-Q101 qualified • SMT for minimal boad footprint • Low profile package • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • EFT protection of data lines in accordance with IEC 61000-4-4 • Built-in strain relief • VBR @TJ= Vbr@25°C x (1 + aT x (TJ - 25)) (aT:Temperature Coefficient) • Glass passivated chip junction • 3000W peak pulse power capability at 10/1000ps waveform, repetition rate (duty cycles):0.01% • Fast response time: typically less than 1.0ps from 0V to VBR min • Excellent clamping capability • Low incremental surge resistance • Typical IR < 2^A for VR > 10V • High temperature soldering guaranteed: 260°C/10 seconds at terminals • UL Recognized compound meeting flammability rating V-0. • Meet MSL level1, per J-STD-020, high temperature soldering guaranteed. • Matte tin lead-free plated • Halogen free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Functional Diagram Applications Cathode TVS Components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/2

Open the catalog to page 1
TPSMD Series - 2

Llttelfuse* Expertise Applied | Answers Delivered TVS DiodesSurface Mount - 3000W > TPSMD series Electrical Characteristics © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/20/18

Open the catalog to page 2
TPSMD Series - 3

Surface Mount – 3000W > TPSMD series I-V Curve Characteristics Bi-directional Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS...

Open the catalog to page 3
TPSMD Series - 4

Surface Mount – 3000W > TPSMD series Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform A 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % PM(AV), Steady Sate Power Dissipation (W) Uni-direcƟonal V=VR Bi-direcƟonal V=VR Figure 6 - Steady State Power Derating Curve Half Value IPPM IPPM Figure 5 - Typical Junction Capacitance Peak Value IPPM TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM VBR - Reverse...

Open the catalog to page 4
TPSMD Series - 5

Llttelfuse* Expertise Applied | Answers Delivered TVS DiodesSurface Mount - 3000W > TPSMD series Soldering Parameters © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/20/18

Open the catalog to page 5
TPSMD Series - 6

Surface Mount – 3000W > TPSMD series Part Numbering System Part Marking System TPSMD XXX C A Cathode Band (for Uni-directional products only) Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Options Component Package Part number Packaging Option Packaging Specification Tape & Reel - 16mm tape/13” reel Tape & Reel – 16mm tape /7” reel Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode Cover tape For Unidirectional parts only Dimensions are in inches (and millimeters). Disclaimer Notice - Information furnished is believed to be...

Open the catalog to page 6

All Littelfuse catalogs and technical brochures

  1. ECSW SERIES

    3 Pages

  2. LSR-0

    1 Pages

  3. LSRU SERIES

    2 Pages

  4. 50R-400-ALT

    1 Pages

  5. ALT SERIES

    2 Pages

  6. AK1-Y Series

    4 Pages

  7. TS Series

    11 Pages

  8. MP8000

    2 Pages

  9. 606 Series

    3 Pages

  10. ST Series

    3 Pages

  11. TPSMB Series

    6 Pages

  12. POLYFUSE®

    6 Pages

Archived catalogs