Catalogs >
Littelfuse >
setP™ Temperature Indicators for USB Type-C

setP™ Temperature Indicators for USB Type-C
4Pages

Catalog excerpts

setP™ Temperature Indicators for USB Type-C - 1

Expertise Applied | Answers Delivered PolySwitch Temperature IndicatorsSurface Mount > setP™ Series setP™ Temperature Indicators for USB Type-CDescription The Littelfuse setP™ temperature indicator helps protect USB Type-C plugs from overheating. It has been designed to the unique specifications of USB Type-C and is capable of helping to protect even the highest levels of USB Power Delivery. Features Agency Approvals Notes: 1. T^d = Typical indicating temperature: Typical temperature when device switches to indicating resistance (Rind) 2. Maximum post reflow resistance measured at 25°C in still air 3. Rind = Indicating resistance when device reaches the indicating temperature (T^) © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/

Open the catalog to page 1

setP™ Temperature Indicators for USB Type-C - 2

M Llttelfuse* Expertise Applied | Answers Delivered PolySwitch Temperature IndicatorsSurface Mount > setP™ SeriesElectrical Characteristics 1. |h0|d= Hold current: maximum current device will pass without tripping in 20°C still air 2. Itrip = Trip current: minimum current at which the device will trip in 20°C still air 3. Vmax = Maximum voltage device can withstand without damage at rated current (Imax) 4. Imax = Maximum fault current device can withstand without damage at rated voltage (Vmax) 5. Pd= Power dissipated from device when in the tripped state at 20°C still air 6. Rmin = Minimum...

Open the catalog to page 2

setP™ Temperature Indicators for USB Type-C - 3

M Llttelfuse1 Expertise Applied | Answers Delivered PolySwitch Temperature IndicatorsSurface Mount > setP™ Series Dimensions Product Dimensions Part Ordering Number System SETP 0805 -100 -SE Series Size Indicating Temp SE - Single End Cables CC - Cable with Type-C Plug on each end Installation and Handling Guidelines • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. • Hand-soldering of PTC devices on boards is generally not recommended. Users shall define and verify this process if needed. • Consult Littelfuse when the device is to be...

Open the catalog to page 3

setP™ Temperature Indicators for USB Type-C - 4

^ Littelfuse" Expertise Applied | Answers Delivered PolySwitch® Temperature IndicatorsSurface Mount > setP™ SeriesTape and Reel Specifications Standard Pack Quantity: 4,000 pcs Minimum Order Quantity: 20,000 pcs Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2019...

Open the catalog to page 4