For More Information… on Retrofits, Panel Mount Adapters and more accessories, visit Littelfuse.com/relayaccessories

Protection Relays and Alarm Systems are supplied with free software. The software simplifies programming and allows the user to save setpoint files and reuse them for similar applications. The software gives the ability to change parameters and see the impact on the protection time current curves. It also allows another device curve to be entered to view simple coordination. SOFTWARE Product Features Accessory For Solutions-M Relay Interface Software Provides the ability to configure and monitor Modbus networks. The features include data logging, real-time data monitoring and fault and event...

Accessories Electrical Uttelfuse* Expertise Applied | Answers Delivered ELECTRICAL Product ELECTRICAL ACCESSORIES Features PGA-1100.0010 Diode Logic Unit Used in installations with more than one breaker and more than one Littelfuse Arc-Flash Relay. It separates the trip paths, so the breakers can be tripped independently from each other. Forfull datasheet, see pig. 81 Panel mountable, industrial potentiometer recommended for remote time delay adjustment. The shaft is slotted for screwdriver adjustment and serrated for slip-proof finger adjustment. Accepts Versa-Knob or Lock Shaft. May be ordered...

ELECTRICAL ACCESSORIES P1015-18 Quick Connect Screw Adaptor Screw adaptor terminal designed for use with all modules with 0.25 in (6.35 mm) male quick connect terminals. Screw terminal accepts ring or spade terminals. Modules with 0.25 in (6.35 mm) male quick connect terminals. Consult the individual datasheet to determine compatibility. P1015-13 P1015-64 P1015-14 Female Quick Connect Terminals These 0.25 in (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. Consult individual datasheet to determine compatibility. P0400 Time Adjustment Dials PART NUMBER...

Accessories Electrical Uttelfuse* Expertise Applied | Answers Delivered ELECTRICAL Product ELECTRICAL ACCESSORIES Features LPSM003ZXID Indicating Fuse Holder LPSM003Z Non-indicating Fuse Holder Littelfuse POWR-SAFE Dead Front holders provide optimum protection to personnel for Class CC and Midget-Style fuses. 600 V ac/dc Class CC and Midget-Style fuses 0KLK002.T Midget Fuse (2 Amp) 10 x 38 fast acting, high-interrupting capacity, current-limiting type fuse. 600 V ac/500 V dc The VRM6048 accessory module allows the voltage monitor to monitor a 3-phase 550 to 600 V ac Line. VRM6048 Voltage Monitor...

Uttelfuse' Expertise Applied | Answers Delivered AccessoriesGround Reference Modules, High-Tension Couplers, & Relay Testers GR MODULES, HIGH-TENSION COUPLERS, & RELAY TESTERS Product SE-GRM024 Ground Reference Module SE-GRM048 Ground Reference Module SE-GRM125 Ground Reference Module SE-GRM250 Ground Reference Module SE-GRM500 Ground Reference Module SE-GRM780 Ground Reference Module SE-GRM1000 Ground Reference Module GROUND-REFERENCE MODULES Connects the SE-601 relay to an ungrounded 24 V dc bus. Connects the SE-601 relay to an ungrounded 48 V dc bus. Connects the SE-601 relay to an ungrounded...

Accessories Remote Indication Uttelfuse* Expertise Applied | Answers Delivered INPUT MODULES & METERS INPUT MODULES

Uttelfuse* Expertise Applied | Answers Delivered Accessories Remote Indication METERS & SENSING RESISTORS Product RK-325I Remote Indication Assembly RK-302 Remote Indication and Reset Kit RK-332 Remote Indication ^ and Reset Kit ®c@-us PGA-0500 Analog % Current Meter PGA-0510 Analog Ohm Meter REMOTE INDICATION & METERS Features Panel-mounted remote indication with NEMA 1 rating Panel-mounted remote indication and reset, standard 22 mm mounting with NEMA 4 and NEMA 13 rating. Panel-mounted remote indication and reset, standard 22 mm mounting with NEMA 4 and NEMA 13 rating. Panel-mounted analog...

Remote Indication REMOTE INDICATION & MONITORING REMOTE INDICATORS & MONITORS Product Motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products, and the 601 voltage monitors, via Modbus protocol with a communications module. The RM1000/777 motor management system combines unsurpassed electronic motor protection and critical, user-friendly, motor monitoring. 777 series 77C series 601 series For full datasheet, see pg. 246 Full datasheet available at www.littelfuse.com/rm1000 Motor-monitoring device to be used in conjunction...

Accessories Communication Uttelfuse' Expertise Applied | Answers Delivered

Accessories Terminations & Adapters Littdfuse' Expertise Applied | Answers Delivered TERMINATIONS & ADAPTERS Product 1N5339B Termination Device SE-TA6-SM Stud-Mount Termination Assembly SE-TA6 Termination Assembly SE-TA6A (PGA-0T6A) Termination Assembly c(||-us TERMINATIONS & ADAPTERS Features 5 W axial-lead ground-check termination. Included with SE-105 and SE-107. 50 W ground-check termination that is robust and compact for submersible pumps. Wire lead simplifies installation. (Replacement for 1N4553B) 50 W ground-check termination with convenient mounting holes and screw terminals. Temperature...

Liquid Level Control LIQUID LEVEL PROBES & PROBE HOLDERS LIQUID LEVEL CONTROL ELECTRODES Product Threaded stainless steel probe measuring 24 in (61 cm) long. Designed for use with PHST-38QTN liquid level control electrodes. LLP-24 Liquid Level Probe Designed for use with all conductive liquid level controls. Composed of insulators and metal parts made of number 300 series stainless steel. These internally conductive probe holders are designed for a maximum steam pressure of 240 PSI; 400 °F maximum. Maximum voltage from electrode to ground. PHST-38QTN is UL 353 Recognized. NO.8–32 THDS Inches...

CT SELECTION GUIDE PRODUCT GROUND-FAULT TRIP LEVEL (or insulation level) Indication only EFCT series EFCT series EFCT series EFCT series GROUNDCONDUCTOR MONITORING RESISTANCE GROUNDING GROUND-FAULT PROTECTION EFCT series (5-A Primary) MOTOR & PUMP PROTECTION Existing CTs can be used or same as MPU-32. Existing CTs can be used or same as MPS. FEEDER PROTECTION EFCT series (5-A Primary) Note: See page 502 for additional information on CT selection. See page 482 for CT sizing chart. *Phase CTs should be selected with a primary rating of 100 – 300 % of rated current to maintain specified accuracy....