Power ranges: 12.5-17.0 kW; 16.7-22.7 bhp Fixed speeds: 1500, 1800 r/min DURABLE, RELIABLE, EASY TO MAINTAIN LIQUID COOLED, G BUILD DIESEL ENGINE OVERVIEW The LPWX Series has been developed to deliver a compact, high power density engine with improved fuel consumption. Through development and use of the Lister Petter HRCS advanced combustion system additional attributes have also been achieved. These combine to give a smoother, quieter and more powerful engine coupled with our world famous reliability. SPECIAL ATTRIBUTES • LP-HRCS (High Re-Entrant Combustion System) • multi-hole fuel injection system • hydro-honed injector hole conditioning • increased power density • reduced fuel consumption and Noise • 500-hour service intervals • designed for continuous operation in ambient temperatures up to 52°C (122°F) • cold start capability down to -32°C (-25.6°F) BASIC ENGINE CHARACTERISTICS • diesel fuelled • direct injection • 3 cylinders • liquid cooled • naturally aspirated DESIGN FEATURES AND EQUIPMENT • heavy duty air cleaner* • Polyvee fan/alternator drive belt* • inlet and exhaust manifolds* • inlet manifold heater plugs • fuel lift pump • self-vent fuel system with individual fuel injection pumps • fuel lter / agglomerator • gear driven positive displacement type lubricating oil pump * Optional items standard on most builds spin-on lubricating oil lter 12V starter motor* 12V battery charge alternator* safety switches* fuel control solenoid (energised to run)* mechanical governing radiator with fan and belt guard* ywheel with ring gear; 7.5" heavy ywheel for 1500/1800 r/min SAE 5 ywheel housing (SAE 4 optional) standard skid base packing operators’ handbook OPTIONAL ITEMS • oil cooler • 24V electrics • increased oil sump capacity (deep sump) See also items with asterisk under Design Features and Equipment. A range of options allows you to select a specication that matches your requirements; please consult your Lister Petter distributor.

ALPHA MAX SERIES: LPWX3 ENGINES TECHNICAL DATA SHEET Fuel Stop Type of fuel injection Number of cylinders Aspiration - Power ratings measured at the ywheel and fuel consumptions, apply to a fully run-in, non derated engine without a radiator and fan tted and other power absorbing accessories or transmission equipment. - The overload (intermittent) capability applies to a fully run-in engine. This is normally attained after a running period of about 50 hours. Key to Emissions Compliance EU Stage 3A only RATING DEFINITIONS TO ISO 3046 ISO Standard Conditions Barometric pressure Relative humidity...