Shelving Systems - Pallet and Cantilever Shelving System
24Pages

{{requestButtons}}

Catalog excerpts

Shelving Systems - Pallet and Cantilever Shelving System - 1

Shelving Systems Pallet and Cantilever Shelving System Pallet shelving systems Cantilever shelving systems

Open the catalog to page 1
Shelving Systems - Pallet and Cantilever Shelving System - 2

Pallet shelving systems Efficient, orderly and sturdy Pallet shelving helps to store mainly palletised goods. Pallets and containers stand neatly on top of or next to each other. The items can be arranged from individual shelves to large installations, depending on the available space and stored goods. Pallet shelving systems are designed in such a way that almost the entire load capacity can be used. End stand extension according to Trades Association directives Comp. load Clear compartment width 2700 Basic unit Comp. height At least 100 from top edge of the pallet to the bottom edge of...

Open the catalog to page 2
Shelving Systems - Pallet and Cantilever Shelving System - 3

Pallet shelving is the ideal solution for efficient, orderly and flexible pallet and goods storage Safety Note Load dimensions may exceed the nominal dimensions! Control unit lifting height: Top edge of top strut + 200 mm. The unit load specification refers to units which consist of one basic unit and at least three add-on units and have at least three strut pairs per unit.

Open the catalog to page 3
Shelving Systems - Pallet and Cantilever Shelving System - 4

Pallet shelving systems Pallet shelving systems Full packages 1500 to Planning dimensions & load specs Total width*: Basic unit = Strut length + 170 mm Add-on shelf Strut length + 85 mm = Total depth: Unit load Comp. load * Specifications refer to the complete shelving systems on this double page. Features n Optimum solution for efficient, orderly and flexible pallet and goods storage n our metal brackets, height-adjustable in 50 mm increments F n ongitudinal and traverse storage possible L n losed box sections ensure high stability C n tands consisting of cold worked profiles which are S...

Open the catalog to page 4
Shelving Systems - Pallet and Cantilever Shelving System - 5

Full packages for pallet shelving systems 1500    400 for light to medium-heavy loading /2 Storage levels plus floor storage level. Load specifications for compartment height 1000 mm. Version: Stand galvanised. Struts plastic coated, RAL 2001 red orange. Strut profile Comp. load Unit load Basic unit Add-on shelf Full packages for pallet shelving systems   200 for light to medium-heavy loading 2 Storage levels plus floor storage level. Load specifications for compartment height 1000 mm. Version: Stand galvanised. Struts plastic coated, RAL 2001 red orange. Strut profile Comp. load Unit load...

Open the catalog to page 5
Shelving Systems - Pallet and Cantilever Shelving System - 6

Pallet shelving systems Shelving component parts Stands Stand disassembled Version: Cold worked profiles which are bolted on the floor, galvanised. Unit loads Unit loads Stand type Compartment width > 2700 ≤ 3600 mm Strut profiles The stand load refers to shelving with a max. height from 8 metres (top strut) to 12 m on request. The loads refer to shelving with: at least 4 units at least 3 strut levels evenly distributed load of a compartment width ≤ 2700 mm or > 2700 mm and ≤ 3600 mm. For compartment widths larger than 2700, a strut of HN 120-20 should be used. Reduce the unit loads for...

Open the catalog to page 6
Shelving Systems - Pallet and Cantilever Shelving System - 7

Struts Struts The specified loads of each stand type have max. loads (kg) for each strut pair for compartment height 1500 mm. For each shelving system structure, the max. compartment loads may vary. Version: plastic coated, RAL 2001 red orange.

Open the catalog to page 7
Shelving Systems - Pallet and Cantilever Shelving System - 8

Pallet shelving systems Shelving accessories Safety stop for pallet shelving, lightweight specification Surface galvanised or painted in RAL 2001 red orange. Length mm Safety stop for pallet shelving, heavyweight specification Surface painted in RAL 2001 red orange. Length mm Levelling plates To level out uneven floors. Height mm Rear gratings Following the BGR 234 guidelines, shelving with rear gratings protect stored goods from falling down; this applies to transport routes and work areas. Surface plastic coated, RAL 5010 gentian blue, without fixing accessory. Plastic coated Plastic...

Open the catalog to page 8
Shelving Systems - Pallet and Cantilever Shelving System - 9

Fastening sets for rear gratings 1 set per rear grating. Galvanised surface. Art No. Fastening set with Pallet overhang 50 mm, universal for all stand types Pallet overhang 100 mm, universal for all stand types Locking pin for multiple struts Art No. For each strut, two locking pins should be inserted Spacers Required for double shelving systems. Length mm Upright guard Protects shelving uprights at entrances and passages, in compliance with the requirements of BGR234 and DIN EN 15512, complete with 4 screw anchors. Height mm Signal colours black/yellow U-shaped upright guard Protects...

Open the catalog to page 9
Shelving Systems - Pallet and Cantilever Shelving System - 10

Pallet shelving systems Shelving accessories Angle and depth supports Lightweight angle support With side and rear raised edges as safety stop, supplied disassembled. Load 250 kg (per pair). Surface galvanised or painted in RAL 2001 red orange. Shelving depth mm Heavy angle support With side and rear raised edges as safety stop, supplied disassembled. Load 1150 kg (per pair). Surface galvanised or painted in RAL 2001 red orange. Shelving depth mm Stepped depth support For chipboard of 19 mm or 38 mm. Lifting capacity increase, see table of chipboard shelves Price per piece. Surface painted...

Open the catalog to page 10
Shelving Systems - Pallet and Cantilever Shelving System - 11

Shelves Chipboard shelf with stepped depth support, without struts Chipboard 38 mm, the chipboard top edge is flush with the strut top edge to prevent damage to chipboard during storage and retrieval. Compartment load increase per additional depth support = 600 kg, depth support RAL 2001 red orange. Compartment width mm Comp. load Chipboard shelf complete with centring plate, without struts Chipboard shelf 38 mm, surface natural, complete with centring plate placed on the strut. To provide protection during passage in vehicles and on foot – in accordance with BGR 234 directives. Application...

Open the catalog to page 11
Shelving Systems - Pallet and Cantilever Shelving System - 12

Cantilever shelving systems For light and medium loads requirements The cantilever shelving systems can be adapted to local requirements. Goods of widely differing dimensions and weights can be stored at the same time. The cantilevers are screwed to the the vertical stands in increments of 100 mm. This means that the indi- vidual storage levels can be adjusted to suit the goods to be stored. This space-saving storage system minimizes the amount of space required. Cantilever shelving systems can be used from one side or from both sides. Any change in the storage requirements can be catered...

Open the catalog to page 12

All LISTA catalogs and technical brochures

  1. EDGE

    6 Pages

  2. MRO

    20 Pages

  3. Lista lift

    12 Pages

  4. COMPACT III

    238 Pages

  5. LEAN

    16 Pages

Archived catalogs

  1. Colours

    1 Pages

  2. Product range

    769 Pages

  3. LISTA Compact

    198 Pages