Kopendium 2-Storage and transport system NC
30Pages

NC storage & transport systems NC storage & transport systems

NC storage & transport systems

NC storage & transport systems Product benefits Planning information Tool holders ISO-SK ,  HSK / VDI , Capto, to drill out yourself, EROWA NC drawer storage Insert frame and pairs of frame supports Tool holder sets NC cabinets Configurable NC cabinets with hinged doors Configurable NC cabinets with roller shutters Accessories for configurable NC cabinets Pre-configured NC cabinets NC transport unit Configurable NC transport unit Accessories for configurable NC transport unit Pre-configured NC transport unit NC bench stand Pre-configured NC bench stand Configurable NC bench stand NC tool...

NC storage and transport systems Organise equipment for predefined tools The high level of flexibility and modularity of the Lista NC products provides optimal logistics solutions. This means that the potential for rationalisation around machine tool machines can be fully exploited. The extensive product range covering tools, clamping and measuring equipment ensures a holistic approach to the task. Not just storage, but also transport and handling of tools and equipment are within its scope. Insert frames and pairs of frame supports Insert frames can be inserted into cabinets, drawers and...

Thanks to the NC storage and transport systems our tools are safely stored and are always close at hand, next to the relevant workplace. NC storage & transport systems Colours Products available in 12 standard colours and 12 additional colours (with surcharge). When ordering, please use the desired three-digit colour code (instead of XXX). Custom colours on request. For colour information see fold-out

NC storage and transport systems Organised storage NC Inventory management using Lista NC solutions Wherever electronically controlled machines are in use then NC tools need to be stored in an organised and protective manner. Whether in the central tool and tool spare parts store or when picking, for the transport to the washing station and the tool disassembly point, the modular and universally usable NC system can be used to equip your company with tailor-made storage. The holding of NC tools ready to use close to a machine is a decisive factor wherever keeping machine down-time to a...

NC tool holders The modular system The NC tool holders are inserted into the inserts and tool cradles. These fit in the drawer cabinets, drawer walls, universal cabinets, vertical pull-outs and in the Lista lift. The transport units and the bench stands complete the system. With an amazingly simple system, Lista drawer walls and all Lista cabinets which include drawers can be equipped with NC tool holders by using insert frames. And equally, the installation of tool cradles in roller shutter cabinets and transport units is no problem at all. Storage using tool cradles NC storage & transport...

Planning information Partitioning schemes for NC tool containers The capacity of each of the different storage and transport units for NC tools can be seen in the following table. The partitioning schemes for each type of tool can be read off beside each of the article numbers. Using this scheme you can use the table to calculate the maximum capacity per inserted storage and transport unit. Width x Depth Units (E) Tool cradle Width x Depth mm NC transport unit For assembly of 1 insert frame and 2 tool cradles. Width x Depth x Height mm For assembly of 1 insert frame and 4 tool cradles....

In order to ensure optimal and secure storage when using insert frames and tool cradles you should always note the maximum storage height of each of the different tools. This can be calculated from the cone length (shaft height) of the tools plus the height of any additional parts such as fitting pins or other components. So that the tools are not under pressure, making them subject to possible damage, this dimension must always be at least 2 mm less than the quoted storage height. With the various pairs of frame supports the storage height can be varied and can easily be adjusted to the...

Tool holder system Using this system various options are available for different tools which can be fitted in a support in any combination.The holders are screwed on or attached using a snap fastener. Specification: high-quality plastic. Colour: red. Assignment pattern see page 276 The entire Lista range offers countless solutions for your specific needs. Online Compendium 2, the Lista Configurer and Lista Script can be found here: Tool container ISO-SK 278 * Screwed, see tool holder to drill out yourself. HSK tool holder Specification Tool holder for HSC hollow shaft cylinders are...

* Explanation for "screwed" Screwed tool holders are screwed onto the insert frame or the tool cradle frame usingl or 2 allen screws.

Insert frame and pairs of frame supports These are available as a set or as individual components. 1 pair of frame supports is needed per insert frame. By having frame supports of different heights which can be screwed onto the perforated drawer base with the insert frame, tools with different length cones can be stored in drawers. Insert frame for drawers Accepts all types of tool holders. 1 pair of frame supports is needed per insert frame. Includes screwing material. Without pair of frame supports. Specification: Sheet steel. Colour: Grey, NCS S 4502-R.

Tool holder sets 36 x 27 E Inserted into drawers. Includes 1 insert frame, 1 pair of frame supports Art. No. 12.907.000. Width 588 mm, Depth 447 mm, Height 82-162 mm. Equipped with Assignment pattern 24 holders ISO-SK 40 15 holders ISO-SK 50 24 holders ISO-SK 50 A+C+E/63 B+D+F 18 holders ISO-SK 63 A+C+E/80 B+D+F Tool holder sets 36 x 36 E Inserted into drawers. Includes 1 insert frame, 1 pair frame supports Art. No. 12.904.000. Width 588 mm, Depth 596 mm, Height 82-162 mm. Equipped with Assignment pattern 32 holders ISO-SK 40 20 holders ISO-SK 50 32 holders ISO-SK 50 A+C+E/63 B+D+F 24...

NC storage and transport systems Lista Units NC-cabinets Store equipment safely and keep it organised bis Cabinet housing The housings have double walls with side walls with internal slots to attach pull-out and adjustable shelves, drawers and tool cradles. The adjustment range is sub-divided into a 25 mm grid. Specification: Sheet steel. Colour: according to colour chart. Safety instructions Risk of tipping To avoid the risk of units tipping over, cabinet housings (if they have more than one drawer or more than one pull-out shelf) must be fitted with a single drawer blocking mechanism...