YOUR CONTACT LISSMAC Maschinenbau GmbH LanzstraBe 4 D-88410 Bad Wurzach Telefon +49 7564 307-0 Telefax +49 7564 307-500 [email protected] www.lissmac.com Subject to technical change without notice - We are not responsible for any misprints WET SUCTION UNIT VACUUM WET 501 All parts can be quickly removed for cleaning Simple emptying of the wet container using eccentric lever Wet container with fine hole 0 5 mm sieve easy and quick to clean Sieve made completely of stainless steel (service life) Compact design with high ground clearance Closed system that is directly installed on the floor saw and driven by a hydraulic interface to the machine TECHNICAL DATA VACUUM-WET 501 Required hydraulic supply Q=40 l/min;140bar Water delivery rateDimensions 2450 l/h (L/W/H) 713/908/1525 mm TANDEM CUTTING UNIT Longitudinal and expansion joints are ideal applications for the tandem longitudinal cutting attachment. Two saw blades of different diameters are arranged one behind the other in a line, whereby the front, smaller saw blade opens the joint and the desired depth of the joint is achieved with the rear, larger saw blade with a finishing cut. The cutting method is pulling (drag cut). TECHNICAL DATA TLA SAWING UNIT 1 TLA SAWING UNIT 2 Arbor size 35 mm (6 hole TK 125) 35 mm Drive motor Hydraulic motor 56 ccm Hydraulic motor 63 ccm

hydraulic cylinder infinitely variable 1500 mm Perkins turbo diesel EU stage V / US EPA Tier 4 Final hydraulic stepless 0 - 50 m/min hydraulic stepless 0 - 50 m/min One of the main applications of the drilling unit is the installation of runway and taxiway lights at airports. Holes are drilled in runways and taxiways, ready for installation of the lights. With our drilling unit, users can carry out core drilling in traffic areas up to a diameter of 600 mm. TECHNICAL DATA DRILLING UNIT The side cutting device is mounted on the side of the machine and is used primarily for cutting transverse joints...