Melt flow rate testing machine LTAR-3682V
4Pages

Melting Flow Index Testing Machine LTAR-3682V LTAR-3682V： Melt Flow Rate Instrument MIP meets the standards of GB/T3682-2000,as well as ISO1133-97,ASTMD1238,JISK7210 and other standards involving main parameters.The melt flow indexer is suitable for measuring melt mass flow rate(MFR)and melt volume flow rate(MVR) of plastic materials such as polyethylene,polypropylene,polystyrene,ABS,polyamide,fiber resin,acrylic,POM,fluorine plastic,polycarbonate.It is widely used in plastic departments. The heating cylinder is made up of 304 stainless steel or alloy, for the reason that in high temperature metal material is easily oxidation rust while the melting flow index tester usually performs long-time work at high temperature(up to 400~500 degrees). The melting flow index rate instrument is equipped with dual sensorconfiguration to get precise temperature control and better temperature gradient so that the instrument can worklonger. Linktesting instruments co.,ltd No.133 Liuchangshan Road Gaoxin Distric Jinan P.R.C www.linktesting.org +86-13222558877 andrew@linktestin

According to the national standard, function that four minute countdown after feeding is added in the machine. The RS232 interface is available to be connected to the computer to output data(optional). The last testing conditions can be directly displayed after boot-strap to avoid users resettingtest parameters each time ,reducing the workload of the operators. The maximum temperature can be up to 450~500℃.(optional, special instructions when ordering). After long time test of strong corrosive plastic such as full fluorine plastic, the accuracy of the instrument is non-destructive.( Because...

Fast heating speed，minimal overshoot High precision of constant temperature A constant temperature can be quickly restored after packing . Testing parameter calibration and correction is convenient. Manual and automatic cutting test methods are optional. The instrument is equipped with LCD working platform. The testing results are automatically printed putout equipped with a printer. D.Main technical parameters 1. Extruding and discharging part Charging cylinder diameter：Φ9.550±0.025mm Charging cylinder length：152± 0.1mm Piston rod diameter：9.475±0.015mm 2.Standard testing load(a total of...

charging hopper barrel cleaning load printer paper assemblies within first grade load Linktesting instruments co.,ltd No.133 Liuchangshan Road Gaoxin Distric Jinan P.R.C www.linktesting.org +86-13222558877 andrew@linktesting.org