Link Engineering Company www.linkeng.com Rotor Mapping Station Model 3315 The Model 3315 Rotor Mapping Station is a precision system designed to measure rotor run-out (TIR) and disc thickness variation (DTV). The station utilizes a precision rotary table in conjunction with non-contact capacitive sensors capable of making very small displacement measurements between the probe face and an electrically conductive surface (brake rotor). The system utilizes 2 probes with automated “x” axis movement for positioning of outboard, center and inboard measurement locations. Probe adjustment in the “y” axis is manually controlled and includes fine adjustment “z” (manual control) for positioning the probe on or near the rotor face. An amplifier produces an analog DC voltage output that is proportional to the distance between the probe face and rotor. The table rotation speed is adjustable to allow user configurable data sampling per degree. The system offers straightforward operation and requires minimal maintenance. ProLink Windows software is user friendly and provides graphical reporting for ease of mapping and identifying rotor variations. Features Adjustable Probe Holder Angle Position Measurement Electronically Controlled Rotation Table Control and Reporting Computer ProLink Software Equipment Rack (AC) & Interface Box Non-Contact Probes Disclaimer: Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled. 280207 Single Source for Testing Equipment and Services Across America and Around the World Link Engineering Company 734-453-0800 Asia ● Europe ● North America ● South America www. linkeng.com

Link Engineering Company www.linkeng.com Rotor Mapping Station Model 3315 Specifications Control System ProLink Windows software Rotary Table 10” diameter Rotation 0—360 degrees (continuous) Rate of Travel 0 to 2 rev/min Incremental Encoder 1024 counts per revolution w/ index count “X” Axis Slide (Automated) 8” travel “Z” Axis Slide (Manual) 8” travel Number of Probes/Channels 2 Maximum Range 2.5 mm Resolution +/- 0.0005 mm Sample Rate 200 samples/Sec. Probe Type (standard) Capacitive (non-contact) Probe Type (optional) LVDT (contact) Disclaimer: Information presented in this brochure is for...