1. Catalogs
  2. Link Engineering
  3. Hydraulic Power Steering Pump Test Stand Model 2300

Hydraulic Power Steering Pump Test Stand Model 2300

Hydraulic Power Steering Pump Test Stand Model 2300

Product catalog summary
Overview: The Link Model 2300 Power Steering Pump Tester is engineered for evaluating hydraulic automotive steering pumps. It features a versatile fixture mounting table with a universal plate to accommodate various pump configurations.
Specifications:
  • Motor Drive: 30 kW (40 HP) water-cooled vector duty motor capable of 10,000 rpm.
  • Pump Output Pressure: Ranges from 2.8 to 207 bar (40 to 3000 psi).
  • Hydraulic Oil Temperature Range: 21-176ºC (70-349ºF).
  • Test Pump Speed: 0 to 10,000 rpm.
  • Belt Tension Range: 0 to 8,896 N (0 to 2000 lbs).
Features: The test stand includes a fixture mounting table that moves vertically on linear slides, actuated by an air cylinder. A load cell measures belt load, ensuring precise application on the steering pump. The universal mounting bracket and plate support a wide range of pump tests.
Software: ProLink Software manages machine operations, data acquisition, reduction, and automatic report generation.
Disclaimer: Information is subject to change without notice. Equipment should always be operated with safety equipment in place.
See more

Catalog excerpts

Hydraulic Power Steering Pump Test Stand Model 2300-1

Hydraulic Power Steering Pump Test Stand Model 2300 Typical Specifications Motor Drive 30 kW (40 HP) Pump Output Pressure 2.8 - 207 bar (40 - 3000 psi) Hydraulic Oil Temperature 21- 176ºC (70 - 349ºF) Range Test Pump Speed 0 - 10,000 rpm Belt Tension Range 0 - 8,896 N (0 - 2000 lbs) The Link Model 2300 Power Steering Pump Tester is designed for testing hydraulic automotive steering pumps. This test stand consists of a fixture mounting table with a universal fixture mounting plate accommodating a wide range of pump mounting configurations. The drive assembly consists of a 40hp, 10,000 rpm water-cooled vector duty motor and a fixture mounting table. The fixture mounting table rides vertically on two linear slides with an air cylinder to actuate the table. A load cell is mounted between the air cylinder and the table to measure belt load so that a specific amount of belt load can be placed on the steering pump. The fixturing assembly consists of a universal mounting bracket and universal mounting plate that allows for testing of a wide range of pumps. ProLink Software provides control for machine operation and handles data acquisition, reduction and automatic report generation. For more information about the Model 2300 Hydraulic Power Steering Pump Test Stand and how it can be configured to meet your test requirements, contact LINK at 734-453-0800 or [email protected] Disclaimer: Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled. 270626 Single Source for Testing Equipment and Services Across America and Around the World Link Engineering Company 734-453-0800 Asia ● Europe ● North America ● South America www. linkeng.com

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.