Disclaimer: Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled. 290810 Single Source for Testing Equipment and Services Across America and Around the World Asia œ Europe œ North America œ South America Link Engineering Company 734-453-0800 www. linkeng.com 4-Roll NVH Chassis Dynamometer Model 4900 Typical Specifications Installation Isolated sub frame foundation Noise Acquisition 6 Channel system Maximum Axle Load 5443 kg (12,000 lbs) Minimum Axle Load 907 kg (2,000 lbs) Roadwheel Diameter 1829 mm (72”) Roadwheel Width 711 mm (28”) Maximum Road Speed 225 kph (140 mph) Drive Motor Size 224 kW (300 HP) per axle Vehicle Wheelbase 2.16 to 4.45 m (85 to 175 in) Motor Speed (Base/Top) 300 / 653 rpm A four roll chassis dynamometer can be a useful tool in diagnosing and resolving vehicle NVH issues. The Model 4900 provides the capability to evaluate a wide range of vehicles and a full set of tools for control and measurement. Typical applications include powertrain, brake, tire, and interior trim evaluations. Teamed with the Brüel & Kjær LAN-XI analyzer the Model 4900 provides a state-of-the-art system for facilitating vehicle measurements and analysis. With an automated system for wheelbase adjustment, the Model 4900 can accommodate vehicles from the smallest passenger car to the largest light truck. Typical configurations range from wheelbases of 2.16 to 4.45 m (85 to 175 inches). The result is a very versatile test apparatus with many applications. A key criterion in the Model 4900 is keeping the background noise levels as low as possible to assure high quality noise and vibration measurements. To this end, the rolls are completely enclosed except for the running surface in the room above. The drive motors and other related power equipment are isolated in a separate room or placed in high transmission loss noise enclosures. The result is a background level that is low enough to permit the most sensitive noise measurements. Included with the Model 4900 is a complete control and measurement system. The core of this system is the ProLink™ software package that integrates all control, measurement, analysis, and reporting functions. ProLink has been cited as one of the most versatile and easy to use test software packages in the industry. By integrating all the major control and data acquisition functions, ProLink makes automated test programs easy to program and deploy. For more information or to work on a custom configuration for your needs, please contact our sales staff at +1 734-453-0800 or [email protected]

Disclaimer: Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled. 290810 Single Source for Testing Equipment and Services Across America...