Model 100 FAST Machine Friction Assessment & Screening Test Machine for Brake & Clutch Linings Disclaimer: Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled. 270529 Single Source for Testing Equipment and Services Across America and Around the World Asia œ Europe œ North America œ South America Link Engineering Company 734-453-0800 www. linkeng.com Pump Pressure (Sustained) 11 Bar (160 psi) Clamping Pressure Limit 700 N (157 lbs) Maximum Friction Force 7 N (22 lbs) Normal Rubbing Speed 7 m/s (23 ft/s) Maximum Pump Pressure 11 Bar (160 psi) Motor 1.0 HP Typical Specifications Options • Dynamic Wear Measurement • Variable Speed Drive (Adjustable to 1,000 rpm) • Temperature Measurement via Infrared Pyrometer or Slip Ring • Friction vs. Velocity Assembly • 1.5 HP motor for heavy load test The Model 100 Friction Assessment and Screening Test (FAST) Machine provides a sensitive and reproducible characterization test for friction material specimens. Design simplicity makes the FAST Machine a viable friction and wear tester for brake lining and clutch facing test specimens. The machine operates in either constant clamping force or constant friction force modes, using a constant rubbing speed. The constant friction force mode also provides a reproducible temperature-time history for the sample. Several standard test procedures have been developed for this machine. These include tests for the quality assurance of drum brake segments, disc brake pads, truck brake blocks, and clutch facings. Other tests include friction versus load, cyclic loading, static friction, residual drag, and squeal threshold tests. For more information on the Model 100 FAST Machine and how it can be configured to meet your test requirements, contact LINK at 734-453-0800 or [email protected] The FAST Machine represents a standard that is recognized throughout the industry for evaluating the frictional properties of brake and clutch linings. By closely controlling the test environment, this machine may be depended upon to provide consistent and reproducible results.

Model 100 FAST Machine Friction Assessment & Screening Test Machine for Brake & Clutch Linings Disclaimer: Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment...