Biaxial Wheel Tester Model 3536
1Pages

Biaxial Wheel Tester Model 3536 The Model 3536 Biaxial Wheel Tester performs wheel and hub durability tests in a laboratory setting. It is an efficient and easy-to-use tool that simulates actual driving conditions for vehicles from passenger cars to light trucks and SUV’s. Innovative use of electric servo motors, ball screw actuators and a multi-axis force transducer enable Link’s proprietary Moment Control* method to deliver higher levels of accuracy and repeatability, while shortening test time. ProLink™ software handles machine operation, data acquisition, post processing and report generation. The intuitive and flexible operator interface contributes to improved testing effectiveness. System Features • • • Link’s proprietary Moment Control* system is more accurate and repeatable than the traditional independent control of radial force, lateral force and tilt angle. Electric servo motors and ball screw actuators (no hydraulics) reduce noise and minimize maintenance. Typical Specifications Drum Diameter 970 mm or 1050 mm Drum Width 340 mm (between curb rings) Maximum Activator Load Forces A multi-axis force transducer, mounted directly behind the test part, enables precise measurement of forces and moments. Radial +/- 40 kN maximum • An automatic tire pressure system maintains preset pressure. Lateral +/- 25 kN maximum • Sensors automatically measure tire width and tire diameter. • High drum speed results in shorter test times. • • Actuator Strokes & Angle Radial 250 mm ProLink™ software provides fully automatic, unattended operation or manual operator control, as well as, real time data acquisition, review and report generation. Network capability allows remote test monitoring and report printing. Lateral 250 mm Camber Angle +20º to - 20º ± 0.05 º Drive Motor 55 kW (74 HP) Speed 183 kph with 970mm drum 198 kph with 1050 mm drum Disclaimer: Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled. 290916 Single Source for Testing Equipment and Services Across America and Around the World Link Engineering Company +1-734-453-0800 Asia ● Europe ● North America ● South America www. linkeng.com