Catalogs >
Link-Belt >
RTC-80130

RTC-80130
6Pages

Catalog excerpts

Rough Terrain Crane 130-ton (120.0 mt) • • • • 41.4 ft to 162 ft (12.6 - 49.3 m) five-section formed full power latching boom with no charted capacity deductions for telescoping loads Five boom extend modes provided superior capacities: EM1-EM5 Optional 31 ft to 55 ft (9.4 - 16.7 m) two-piece, bi-fold, on-board lattice attachment with 2°, 15° 30°, and 45° manual offsets Optional 10 - 31 - 55 ft (3.0 - 9.4 - 16.7 m) three-piece, bi-fold, on-board lattice attachment with 2°, 15° 30°, and 45° manual offsets, and 2° through 45° hydraulic offsets Optional three 18 ft (5.5 m) fly extensions plus 55 ft (16.7 m) provide a total attachment length of 109 ft (33.2 m) 278 ft (84.7 m) maximun tip height No deducts for stowed attachments 21,022 lbs (9 535.4 kg) maximum winch line pull 431 fpm (131.4 m/min) maximum winch line speed Electronic joystick controllers 6x2 and 6x6 drive with 23.5R25 tires Four steering modes: independent front, combination, crab, and independent rear Hydrostatic drive Fully independent double “A” arm hydraulic suspension

Open the catalog to page 1

Mechanical boom angle indicator-standard Rough Terrain Crane 130-ton (120.0 mt) The industry’s most innovative solution to big rough terrain crane maneuverability and transportability! • Revolutionary hydrostatic drive on a six-wheeled carrier for the ultimate in job site mobility • Unprecedented transportability • Maneuverability redefined • Over 45 tons (40.8 mt) of on-tire capacity The reach of the optional 55' (16.8 m) two or threepiece offsettable, bi-folding fly can be extended by adding three optional 18' (5.5 m) inserts Complete lighting package Flat deck design and non-slip surface...

Open the catalog to page 2

Folding viewing mirror for travel Folding guard rails & work platform Removable auxiliary winch with hydraulic disconnects Winch viewing mirrors Revolutionary hydrostatic drive on a 6-wheel carrier Not only is this crane easy to get from jobsite to jobsite, it also has extraordinary creep control and jobsite maneuverability, thanks to its hydrostatic powered motors in each wheel. The smaller tires give it an overall height that is ideal for hauling, along with its’ individual six-wheel hydrostatic drive, there is no crane in the world, any size, that can come close to the job site...

Open the catalog to page 3

Powerful hydraulics • Removable auxiliary (rear) winch has hydraulic quick disconnects • For greater productivity and control, multiple pump hydraulic circuit allows simultaneous function • Piston winch motor provides smooth and precise hoisting • Main and available auxiliary winch are equally matched in size and performance • Provisions for the future installation of the auxiliary winch are standard Access is superb with strategically-located ladders, steps, catwalks and CabWalk. Swing-out doors provide exceptional access to engine components. • Extra large windows throughout for excellent...

Open the catalog to page 4

Full power boom with attachment flexibility • Quick reeve boom head eliminates the need to remove the becket when it becomes necessary to change the reeving • Five extend modes for superior capacities throughout the extension range • Available two or three-piece bi-folding lattice fly which allow the tip section to be stored, thus enhancing the lifting performance when using the base section • Boom requires no greasing because of ingenious Teflon wear pucks impregnated in the full contact wear pads Innovative 10 ft (3.0m) fly is integral to one of the on-board fly options. Over 25 tons...

Open the catalog to page 5

Breakthrough transportability • Unlike any other rough terrain crane in this class, in less than an hour and without a helper crane, the RTC-80130 Series II is ready for transport. • Unlike other big RT's, the tires do not need to be removed for transport. • Only the counterweights and outrigger boxes need to be removed to get the crane's vehicle width under 10' (3.05 m). • Because it is under 10' (3.05 m) wide and features a low overall height, the RTC-80130 Series II transports easier than the competition. Link-Belt Construction Equipment Company is a leader in the design, manufacture,...

Open the catalog to page 6