HTT-86110
12Pages

110 U.S. ton|100 metric ton Hydraulic Truck Crane 110 U.S. ton|100 metric ton Truck Terrain Crane

110 U.S. ton|100 metric ton Hydraulic Truck Crane 110 U.S. ton|100 metric ton Truck Terrain Crane Outstanding mobility on the road and on the job site • 38.3-164.1 ft |11.7 - 50.0 m 6-section pin & latch boom with attachment flexibility - 10-35-58 ft |3.0-10.7-17.7 m three-piece, bi-fold, on-board lattice attachment with 0°, 15°, 30°, 45° offsets - optional - Two 16 ft | 4.9 m lattice inserts provide a total attachment length of 90 ft | 27.4 m - optional - 262 ft | 79.7 m maximum tip height • Big, wide cab with outstanding visibility • Winches deliver impressive numbers of line pull and...

Powerful and responsive hydraulics • Two-speed hydraulic piston motor system delivers superior hoisting. Matched size optional front and rear winches provide equal max line pulls of 20,739 lbs (92.25 kn) and max line speeds of 495 fpm (150.9 m/min) on 16” (40.6 cm) root diameter grooved drums. • Drum rotation indicators - standard. Designed for amazing job-site maneuverability Winch viewing camera Optional hoist drum cable follower and optional third wrap indicators Access ladders and folding guardrails Steerable all wheel axles, in conjunction with super single tires, makes the HTT even...

Total crane operating system Link-Belt Pulse is the Link-Belt designed total crane operating system. It includes the rated capacity limiter, boom extend mode controller (EMC), self-diagnostic capabilities and continuous monitoring of multiple crane functions and conditions. To aid operators in a safe and efficient operation, its high-resolution, color-intense graphic display provides excellent contrast even in direct sunlight. Single axis controller Rated capacity limited light bar Dual axis controller Operator’s cab provides ergonomic comfort and control Roomier and quieter operator’s cab...

• Standard - total of 16,000 lbs | 7.2 mt (A,B,B,C) of removable counterweights. Capacities for five different counterweight configurations. • Optional - up to 48,600 lbs | 22 mt (A,B,B,C,D,E,F,F) of removable counterweights. Capacities for up to eleven different counterweight configurations. • All configurations can be raised and lowered by hydraulic cylinders from the comfort of the operator's cab for ease of installation and removal. Counterweight Configurations All counterweight configurations can be raised and lowered by hydraulic cylinders from the comfort of the operator's cab for...

Wind speed indicator 1 Superior capacities and extension ranges T5 Standard boom dolly connections The only greaseless, \xhigh-capacity formed booms ^ designed and built in North America! Mechanical boom angle indicator -standard Greaseless boom pads

Optional: 10-35-58 ft (3.0-10.7-17.7 m) three-piece bi-fold, lattice attachment with 0°, 15°, 30°, and 45° offsets 58 ft|17.7 m 35ft | 10.7 m 10 ft |3 m Main boom length 2 load lines charted in all 6 boom modes! • Innovative 10 ft (3.0m) fly is integral to one of the on-board fly options. • Over 24 tons (21.7 mt) capacity and one-load two-line lift procedures. • Manual offsets: 0°, 15°, 30°, 45° • Full load telescoping capacity Tip-Heights – Optional On-board Lattice Fly Fly erection and stowing assist cylinder 16 ft +16 ft + 58 ft | 4.9 + 4.9 + 17.7 m 16 ft + 58 ft | 4.9 + 17.7 m 58...

Superior accessibility The pull-out CabWalk™ slides out from its secured travel position underneath the operator’s cab to give the operator a platform to stand on for easy entry and exit from the cab. The upper work platform with folding handrails allows for easy inspection and maintenance of the HTC-86110. Access to the operator’s cab and engine compartment is superb with strategically located ladders and ste

See what you’ve been missing – onboard cameras! Swing viewing camera Right side viewing camera Rear viewing camera Winch viewing camera Optional - boom dolly camera* *Supplied by Dolly manufacture

Road and job site ready! • Automated transmission (no clutch pedal) −12 speeds forward, 2 speeds reverse with two modes of operation: fully automatic and semi-automatic • Job site travel is permissible with counterweight for exceptional job site versatility. • Boom dolly/trailer ready when equipped with optional boom float kit, rear electrical and air connections. • Cruise control • Engine compression brake • Ether injection system—optional Optional rear electrical and air connections Air-ride suspension front and rear provides a smooth ride and precise handling. Optional air-ride lift...

Work light package — Standard Lighting packages include: Dual boom floodlight & high intensity remote controlled floodlight Cab and upper mounted work lights Work light package -9 work lights provide superior night visibility Illuminated compartments and controls for night-time operation Upper electrical panel Fuel tank Outrigger controls

■leadeii customer Your crane investment is always protected... with your Link-Belt distributor. When you invest in a Link-Belt crane, you invest in a legacy of outstanding customer support dating back to 1874. The ultimate value of a machine begins with state-of-the-art design and quality manufacturing, but it is the excellent Link-Belt distributor product support that determines its long term value. This philosophy has earned Link-Belt cranes the enviable , position of traditionally commanding some of the highest resale prices in the industry. As a member of Link-Belt Cranes user’s group,...