150 ton (137 mt) Lattice Crawler Crane • Tier 4i Isuzu power 282hp (210 kw) (high sulphur version available) • Standard freefall wet brake winches with automatic mode, 26mm wire rope front & rear • 30 ton (27.2 mt) jib • Hook and pin side frames • HSL-style operator’s cab • Modular counterweight design • Range control • Upper guard rails • Rear view camera with color monitor • Bullet-proof hydraulic pilot-operated controls • BIG capacities • Luffer-ready

Checklist ✓ Upper guardrail ✓ Rear view camera ✓ Travel and swing alarm ✓ Cat walks ✓ Optional winch view camera 150 ton (99.97 mt) Lattice Boom Crawler Crane • Transport complete crane with base section and optional 10 ft (3.05 m) rigging insert, less sideframes and counterweight under 90,000 lbs (40 823 kg) • 7-piece counterweight system design with innovative removal system • Latest rated capacity limiter with color graphics • Power-up/down with auto brake OR freefall • Superior capacities Rope guards and polyamide sheaves Sealed boom hoist bearings in mast and ball Redundant limit switcher...

weights nsport Wire rope pendant storage Optional 10 ft self-assembly section Excellent access for all routine engine and hydraulic maintenance Heavy-duty power for the most demanding jobs Full contact 44” (1.12m) track shoes designed for maximum contact area minimizes ground bearing pressure • Robust engine with total horsepower control provides unbeatable line speeds under load • Six pump main hydraulic package provides smooth performance • Matched front & rear drum performance with 46,924 lbs (21 285 kg) line pull • Multi-disk wet brakes for smooth load control. Minimal no friction drag from...

Awesome air, comfort & control at your fingertips The spacious HYLAB cab is engonomically designed for maximum visibility, operating comfort and control with these standard feature: • 18,000 BTU air conditioning and 19,000 BTU heating run through upper and lower vents • Rating capacity limiter with load cell located in boom hoisted dead end • Pilot-operated armchair controls with adjustable sliding console • Foot throttle pedal • Travel levers conveniently located on right hand console HSL capacity limiter with high visibility color graphic display Operator’s cab console features include: • Complete...

Available attachments provide strength and versatility Conventional open throat boom Boom and jib — open throat • 260 ft (79.25 m) conventional boom - 70” x 62” (1.78 x 1.57 m) in-line pin-connected tube boom attachment and open throat top section • Main chord members are made with 100,000 psi yield material with high strength lattice. • Wire rope pendants stow with boom connecting pins on each extension for ease of transport. • Boom suspension is achieved through 14-part boom hoist reeving. • Standard equipment wear blocks protect lattice sections from wire rope scuffing. • 230 ft + 80 ft (70.10...

Transports with base section & 10 ft insert — start lifting immediately! • Transports with base section and optional 10 ft (3.05 m) rigging insert • 15,000 lb (6 804 kg) biscuit-style counterweight maximizes • Simple counterweight removal system lowers counterweights • Carbody jacks are plumbed live — no need to disconnect • Three-legged lift sling handles counterweight and crawlers • 238 HSL moves in 7 loads with full boom, jib and counterweight • Self-assembly and disassembly (no helper crane required) Lexington, Kentucky ® Link-Belt is a registered trademark. Copyright 2012. All rights reserved....