LMR01 Catalog
4Pages

ACME SCREW LINEAR ACTUATOR LMR 01 OVERALL DIMENSIONS La = Lc + Stroke Motor cable length 0.3 m Length Stroke 300 mm Stroke > 300 mm Lc [mm] 90 + Stroke 140 + Stroke T [mm] 78 + Stroke 128 + Stroke 044.5 er o c n e th 'I tor ot JE STROKE CODE STROKE [mm] LENGTH MASS [kg] Lc [mm] La [mm] C50 50 140 190 0.85 C100 100 190 290 1.10 C150 150 240 390 1.25 C200 200 290 490 1.40 C250 250 340 590 1.55 C300 300 390 690 1.70 PERFORMANCES AND FEATURES ACCESSORIES ■ Pull-Push load up to 1 300 N ■ Stainless steel push rod (code SS) ■ Linear speed up to 52 mm/s Standard stroke lengths: 50, 100, 150, 200, 250, 300 mm (min. stroke limited by FC switches: 50 mm) (for different / longer stroke lengths please contact us) Aluminium housing and rear attachment Anodized aluminium push rod - tolerance f8 Aluminium front attachment 12, 24 or 36 V DC motor with electromagnetic noise suppressor (motor features details on page 69) Duty cycle with max load: 15% over 10 min at (-10 ... +40) °C Standard motor mounting position as per dimensional drawing (right-hand, code RH) Standard protection IP65 - Test IP6X according to EN 60529 §12 §13.4-13.6 - Test IPX5 according to EN 60529 §14.2.5 (tests made with not running actuator) Long-life lubrication, maintenance free ■ Two adjustable built-in stroke end switches (code FC2) Two adjustable built-in stroke end switches, switching off the motor (code FC2X) Extra switch for intermediate position (code FC) 2-channels incremental encoder on motor shaft 1 ppr (code GI 21) 4 ppr (code GI 24) (wiring diagrams on page 75) ■ ■ ■ ■ ■ ■ ■ ■ Number of pulses for 100 mm stroke Ratio RN2 RN1 RL2 RL1 GI 21 192 383 483 967 GI 24 767 1 533 1 933 3 867 ■ ■ ■ OPTIONS ■ Motor mounting position on opposite side (left-hand, code LH) ■ Fixing attachment turned at 90° (code RPT 90) ■ - 8 -

Stampa di fax a pagina intera table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:5.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:9.00pt "Arial", sans-serif; } .font4 { font:10.00pt "Arial", sans-serif; } .font5 { font:11.00pt "Arial", sans-serif; } .font6 { font:13.00pt "Arial", sans-serif; } .font7 { font:14.00pt "Arial", sans-serif; } .font8 { font:16.00pt "Arial", sans-serif; } .font9 { font:19.00pt "Arial", sans-serif; } .font10 { font:20.00pt "Arial", sans-serif; } .font11 {...

'Linear-Mech,j 13. STROKE END SWITCHES AND POSITIONING CONTROL 13.3 Electric stroke end switches FC (linear actuators LMR Sries) Each of the two micro-switches is fitted in a slot with a cam for switches commutation. A screw allows to lock the assembly in the desired position, adjusting in this way the switching position. The nut with suitable shape makes the cams rotate, so to activate the switches. This cam-operated device provides a stable and self-keeping commutation of the switches. The MIN. RETRACTED LENGTH Lc of the actuator is adjusted and controlled by switch FC1. The MAX. EXTENDED...

'Linear-Mech,j 13. STROKE END SWITCHES AND POSITIONING CONTROL 13.5 Encoder GI (linear actuators LMR 01, LMR02, LMR 03 and LMP03) Hall effect, bi-directional, incrmental encoder Output configuration: PUSH-PULL Code GI 21: 2 output channels, 1 pulse per revolution Code GI 24: 2 output channels, 4 pulses per revolution Cable length: as motor cable Protected against polarity inversion Protected against any incorrect output connection NOTE: For conductive cables colour, please refer to the wiring diagram in the "Installation Instructions" supplied with the product. ce E O C N E GI 5 - 24 Vdc 0...