SmartMesh Brochure
8Pages

{{requestButtons}}

Catalog excerpts

SmartMesh Brochure - 1

SmartMesh Embedded Wireless Sensor Networking • >10 Year Battery Life • Complete Wireless Mesh Solution Linear Technology's Dust Networks® product group provides complete embedded wireless systems, including the industry's lowest power IEEE 802.15.4 wireless sensor networking nodes and network and security management software and hardware. Our customers have developed some of the most innovative sensing applications, enabled by the unique no-wires attributes of the Dust® ultralow power products. dust?* rrimM networks TECHNOLOGY

Open the catalog to page 1
SmartMesh Brochure - 2

SmartMesh Overview SmartMesh® embedded wireless sensor networks deliver >99.999% data reliability and >10 year battery life, making it practical to deploy wireless sensor networks in the most challenging environments: l Tough RF Environments with extensive metal and concrete, including industrial plants, data centers, commercial building monitoring, bridges, tunnels l Large Area Networks, such as street parking applications, smart street lighting networks spanning multiple city blocks, commercial irrigation l Dense Deployments, where thousands of nodes operate within radio range of each...

Open the catalog to page 2
SmartMesh Brochure - 3

Pair-Wise Channel Hopping Time synchronization enables channel-hopping on every transmitter-receiver pair for frequency diversity. With a SmartMesh network: l Every packet exchange channel-hops to avoid inevitable RF interference l Multiple transmissions can occur simultaneously, increasing network bandwidth l Networks may be dense and scale without creating debilitating RF self-interference Full Path and Frequency Diversity Each device has redundant paths to overcome communications interruption due to interference, physical obstruction or multipath fading. If a packet transmission fails on...

Open the catalog to page 3
SmartMesh Brochure - 4

SmartMesh IP SmartMesh IP Embedded Products SmartMesh IP™ is built for internet protocol (IP) compatibility, and is based on 6LoWPAN and IEEE 802.15.4e standards. The SmartMesh IP solution is widely applicable and enables low power consumption even in harsh, dynamically changing RF environments. Part Number LTC5800-IPM Operating Temp Range 1 Supply Package Voltage Range (mm × mm) (V) Antenna Connection RF Output Receive Power Sensitivity (dBm) (dBm)2 Onboard Chip Antenna USA, Canada, EU, Australia/New Zealand, India, Japan, Korea, Taiwan MMCX Antenna Connector USA, Canada, EU, Australia/New...

Open the catalog to page 4
SmartMesh Brochure - 5

The DC9000B SmartMesh IP Starter Kit provides all the tools for evaluating SmartMesh network performance for your application needs, as well as the necessary hardware and software for product development. The DC9000B Starter Kit includes five motes, or nodes (DC9003A-B), to enable you to quickly deploy a multi- hop mesh network in the RF environment specific to your application. The StarGazer evaluation software graphical user interface (GUI) allows you to quickly visualize the mesh network, and displays key performance statistics, such as data reliability and latency. Part Number SmartMesh...

Open the catalog to page 5
SmartMesh Brochure - 6

SmartMesh WirelessHART SmartMesh WirelessHART Embedded Products SmartMesh WirelessHART complies with the WirelessHART (IEC62591) standard, offers the lowest power consumption in its class and is the most widely used WirelessHART product available. Part Number LTP5900-WHM Supply Package Voltage Range (mm × mm) (V) LTP5902-WHM RF Output Receive Power Sensitivity (dBm) (dBm)2 MMCX Antenna Connector Onboard Chip Antenna USA, Canada, EU, Australia/New Zealand, India, Japan, Korea, Taiwan MMCX Antenna Connector USA, Canada, EU, Australia/New Zealand, India, Japan, Korea, Taiwan Note 1: I...

Open the catalog to page 6
SmartMesh Brochure - 7

The DC9007 SmartMesh WirelessHART Starter Kit provides all the tools for evaluating SmartMesh network performance for your application needs, as well as the necessary hardware and software for product The DC9007 Starter Kit includes five motes, or nodes (DC9003A-C), to enable you to quickly deploy a multi- hop mesh network in the RF environment specific to your application. The software graphical user interface (GUI) allows you to quickly visualize the mesh network, and displays key performance statistics, such as data Part Number SmartMesh WirelessHART Starter Kit - Includes the • Five...

Open the catalog to page 7
SmartMesh Brochure - 8

Dust Networks Applications Providing low power wireless mesh networks for demanding industrial process automation applications, Dust Networks supports customers that include Fortune 500 companies with solutions for building automation, data center energy management and renewable energy. Thirty thousand Dust Networks enabled systems have been deployed around the globe, securely connecting a variety of smart devices to applications delivering on smarter, greener, more efficient solutions. Data Center Manage the data center environment and significantly reduce energy consumption by connecting...

Open the catalog to page 8

All ADI catalogs and technical brochures

  1. LTC2068

    30 Pages

  2. LTC6373

    34 Pages

  3. ADL9006

    16 Pages

  4. ADL8104

    23 Pages

  5. AD4115

    52 Pages

  6. ADUM7702

    22 Pages

  7. AD7383

    33 Pages

  8. AD7384

    33 Pages

  9. AD4114

    49 Pages

  10. ADUM7704

    22 Pages

  11. AD7134

    86 Pages

  12. LTspice IV

    53 Pages

  13. LT6656 - 1

    18 Pages

Archived catalogs