Catalog excerpts
Power Management Solutions for NXP Processors Tested and Verified Circuit Simulation & Design Tools QorIQ LS1088A Reference Design (LS1088A-RDB) L, LT, LTC, LTM, LTspice, LTpowerPlanner, LTpowerPlay, LTpowerCAD, µModule, PolyPhase, Linear Technology and the Linear logo are registered trademarks and VLDO is a trademark of Analog Devices, Inc. All other trademarks are the property of their respective owners.
Open the catalog to page 1Introduction Power management solutions presented here have been assembled and verified by NXP or third-party development board providers. For more information and technical documentation, visit www.linear.com/nxp. Development Boards in this Brochure Can Be Found at www.linear.com/nxp Contact board supplier to purchase the board Novtech: www.novtech.com novtech ENGINEERING FIRM Arrow: www.arrow.com ARROW Contact Linear Technology for schematics and design support: refdesign@linear.com
Open the catalog to page 2QorlQ LS1088A-RDB The QorlQ LS1088A reference design board (LS1088A-RDB) is designed to exercise the capabilities of the LS1088A device. It has up to eight ARM® Cortex®-A53 cores with the advanced, high performance datapath and network peripheral interfaces required for wireless access points, networking infrastructure, intelligent edge access, including virtual customer premise equipment (vCPE) and high performance industrial applications. Start-Up Sequence 1. Green 2. Blue 5. Purple Summary Report Total Pin = 181.54W Total Pout = 159.45W Total Ploss = 22.09W Total Efficiency = 87.83%...
Open the catalog to page 3QorlQ LS1043A-RDB The QorlQ LS1043A reference design board (LS1043A-RDB) is designed to exercise most capabilities of the LS1043A device, NXP's first quad-core, 64-bit ARM-based processor for embedded networking and industrial infrastructure. LosslalAlW [ffl-BSSL. Start-up Sequence Actual Screen Capture Power Tree designed in LTpowerPlanner
Open the catalog to page 4QorlQ T1023RDB The QorlQ T1023 Reference Design Board (T1023RDB) is a high performance evaluation, development and test platform supporting the QorIQ T1023 communications processor. The board will support the evaluation and development of the dual core T1023 and the single core T1013 communications processors built on Power Architecture® technology. Optional is 12V also provided by LTC4269 POE (Power Over Ethernet). Start-Up Sequence 1. Green 2. Orange and Blue 3. Pink Summary Report Total Pin = 61.77W Total Pout = 52.95W Total Ploss = 8.82W Total Efficiency = 85.72% Actual Screen Capture...
Open the catalog to page 5i.MX7 96Board The i.MX 7 series-based, open-source board provided by Arrow enables secure, power-efficient systems with drastically reduced time to market. The i.MX 7 series is a highly integrated multi-market applications processor designed to enable secure and portable applications within the Internet of Things. The i.MX 7 series utilizes both the ARM Cortex-A7 and Cortex-M4 cores for general purpose programmable processing. Summary Report Total Pin = 12.31W Total Pout = 9.52W Total Ploss = 2.79W Total Efficiency = 77.33% Actual Screen Capture Power Tree designed in LTpowerPlanner
Open the catalog to page 6novtech Evaluation Kit provided by Novtech™ was developed to give OEMs a flexible platform to evaluate i.MX 6 processors by giving access to all the available I/Os on the device and a robust power supply system using the LTC3676-1 PMIC from Linear Technology. The i.MX 6 series of applications processors is a scalable multicore platform that includes single-, dual- and quad-core families based on the ARM Cortex architecture, including Cortex-A9, combined Cortex-A9 + Cortex-M4 and Cortex-A7 based solutions. Summary Report Total Pin = 16.02W Total Pout = 11.05W Total Ploss = 4.97W Total...
Open the catalog to page 74 High Current High Efficiency Bucks + 4 LDOs + DDR Solution with VTTR + I2C Control + Sequencing + Dynamic Voltage Scaling = Complete Power Management Solution for Advanced Application Processor-Based Systems The LTC®3676 and LTC3676-1 are complete power management solutions for NXP i.MX 6 series, ARM Cortex and other advanced portable application processor systems. The LTC3676/LTC3676-1 feature eight independent resistor-programmable voltage rails, with dynamic voltage scaling and sequencing, in compact QFN and thermally enhanced QFP packages. These rails supply power to the processor...
Open the catalog to page 8A PMIC for Modern Application Processors VIN 2.7V TO 5.5V FROM µPROCESSOR 3 Bucks + Buck-Boost + 4 LDOs + I2 C Control + Sequencing + Dynamic Voltage Scaling = A Complete Power Management Solution for Advanced Application Processor-Based Systems The LTC®3589/-1/-2 is a complete power management solution for portable processors such as NXP i.MX, PXA, ARM, OMAP and other advanced portable microprocessor systems. The device features eight independent rails, with dynamic control and sequencing, in a compact QFN package. These rails supply power to the processor core, SDRAM, system memory, PC...
Open the catalog to page 9Design Support Linear Technology provides design support tools that help you select, design and simulate Linear Technology products. These tools shorten design time and optimize your power supply solution before you build your prototype board. For more information and design support, contact a local sales office www.linear.com/contact LTpowerCAD® is a free download and easy-to-use power supply design tool with a user-friendly graphical user interface (GUI) and powerful design features. It helps power supply designers select a solution for given supply specifications, design power stage...
Open the catalog to page 10LTspice LTspice is a free, simple and powerful circuit simulation tool with a library containing all Linear Technology products, as well as commonly used discrete passive and transistor components. Download LTspice LTpowerPlay® is a powerful and intuitive Windows-based development environment used to configure and interrogate power system management (PSM) devices. It can also be used in an off-line mode (with no hardware present) in order to build a multichip configuration file that can be saved and reloaded at a later time. Download LTpowerPlay
Open the catalog to page 11All ADI catalogs and technical brochures
-
LTC2068
30 Pages
-
LTC6373
34 Pages
-
ADL9006
16 Pages
-
ADL8104
23 Pages
-
AD4115
52 Pages
-
ADUM7702
22 Pages
-
AD7383
33 Pages
-
AD7384
33 Pages
-
AD4114
49 Pages
-
ADUM7704
22 Pages
-
AD7134
86 Pages
-
LTspice IV
53 Pages
-
New Products Catalog
43 Pages
-
RF/IF Amplifiers
9 Pages
-
SAR ADC Drivers
2 Pages
-
SmartMesh Brochure
8 Pages
-
INDUSTRIAL SIGNAL CHAIN
24 Pages
-
AUTOMOTIVE ELECTRONIC SOLUTIONS
48 Pages
-
Battery Management Solutions
32 Pages
-
DC/DC uModule Power Products
32 Pages
-
Wireless & RF Solution
36 Pages
-
LT6656 - 1
18 Pages
Archived catalogs
-
New Products Catalog
39 Pages
-
Power Management for LEDs
24 Pages
-
High Speed ADC Products Brochure
14 Pages