Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Linear Abrasive Engineering S.A.
  3. STAG 180/500 Continuous

STAG 180/500 Continuous

STAG 180/500 Continuous
1 / 2 PagesView full catalog

STAG 180/500 Continuous

Product catalog summary
Overview: The document provides technical specifications and features of the STAG 180/500 continuous through feed grinder, manufactured by LINEAR ABRASIVE Engineering S.A. This machine is designed for high-performance grinding and can be combined with up to two vertical stations.
Specifications:
  • Resolution: 0.005 mm or 0.001 mm (optional).
  • Spindles: High-performance direct drive spindles with a maximum speed of 4000 rpm.
  • Frame: Modular rigid frame made of grey cast iron and prestressed concrete.
  • Loading Options: Automatic, semi-automatic, or manual loading.
  • Grinding Direction: From right to left.
  • Spindle and Grinding Wheel: Spindle size ø200x500 mm, grinding wheel sizes ø400, ø500 mm.
  • Infeed: Z-axis infeed of 120 mm, with an infeed rate of 0 - 6000 mm/min.
  • Electrical Control: Siemens S7/1500/TIA.
  • Power: 11 kW for grinding, 28 kW for additional operations, 2.5 kW for brushing unit.
  • Weight: Total weight ranges from 4 to 5 tons.
  • Machinable Part Dimensions: Maximum width of 170 mm, maximum height of 100 mm, and maximum stock removal of 5 mm.
Technology: The machine employs a continuous through feed flat surface grinding technology with vertical spindles and optional brushing units. It uses corundum, diamond, or CBN cup wheels for machining surfaces. Parts are transported by a composite belt and held by magnetic attraction or templates for non-magnetic materials, ensuring guided passage beneath the grinding wheel.
Performance: The machine is designed for high productivity in continuous through feed machining, with controlled processes and part programs to optimize performance.
See more

Catalog excerpts

STAG 180/500 Continuous-1

STAG 180/500 Continuous through feed grinder, can be combined with up to 2 vertical stations Grinding and brushing or polishing Measurement Grinding direction from right to left Pumping tank Performances - Resolution 0.005 mm or 0.001 (optional) - High performance spindles, direct drive - Modular rigid frame of grey cast iron combined with prestressed concrete - Measurement and automatic servo - Additional brushing module - Can be combined with up to 2 stations continuously - Automatic, semi-automatic or manual loading

 Open the catalog to page 1
STAG 180/500 Continuous-2

Technical specifications Number of spindles Abrasive tools 1 + brushing unit (optional) ø200x500 Infeed (mm/min) Direct spindle drive (rpm) Electrical control Width of machinable parts max. (mm) Height of machinable parts max. (mm) Technology 1V: Continuous through feed flat surface grinder equipped with vertical spindle(s) + optional brushing unit(s) Combined operations Highly productive method for continuous through feed machining of surfaces, using corundum, diamond or CBN cup wheels. Transported by a highly resistant composite belt, held by magnetic attraction (by mask or template for parts...

 Open the catalog to page 2

All Linear Abrasive Engineering S.A. catalogs and technical brochures

  1. PARSIFAL 500/500
    PARSIFAL 500/500

    2  Pages

  2. ISOLDE 500/500
    ISOLDE 500/500

    2  Pages

  3. ISOLDE 500/500 + brushing station
    ISOLDE 500/500 + brushing station

    2  Pages

  4. STAG 300/600
    STAG 300/600

    2  Pages

  5. CONSTRUCTION OF ADVANCED GRINDING SYSTEMS
    CONSTRUCTION OF ADVANCED GRINDING SYSTEMS

    43  Pages

  6. STAG 180/500
    STAG 180/500

    2  Pages

  7. STAG 140/400
    STAG 140/400

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.