- Catalogs
- Linear Abrasive Engineering S.A.
- CONSTRUCTION OF ADVANCED GRINDING SYSTEMS
CONSTRUCTION OF ADVANCED GRINDING SYSTEMS
CONSTRUCTION OF ADVANCED GRINDING SYSTEMS
- STAG 140/400: Features up to 3 vertical stations, high-resolution options, and a modular steel frame. Specifications include a spindle diameter of ø200x400 mm, Z-axis infeed of 120 mm, and power options of 7/11/2.5 kW.
- STAG 180/500: Offers up to 2 vertical stations, with a spindle diameter of ø200/500 mm and power of 28/2.5 kW. It features a grey cast iron frame.
- STAG 300/600: Combines up to 3 vertical stations, with a spindle diameter of ø200/500 mm and power of 39/2.5 kW.
- SIEGFRIED 180/500: A tangential grinder with 1 horizontal spindle, offering a spindle diameter of ø200x500 mm and power of 15 kW.
- SIEGFRIED II: Equipped with 2 horizontal spindles for rough and finish grinding, with a spindle diameter of ø200x500 mm and power of 2x7 kW.
- ISOLDE 500/500: Features 1 vertical and 1 horizontal spindle, with a spindle diameter of ø200x500 mm and power of 2x28 kW.
- ISOLDE IV: Dedicated to continuous grinding of coils, with a spindle diameter of AFS ø80x200 mm and power of 4x4.5 kW.
- ISOLDE VI: Equipped with 4 vertical and 2 tilting spindles for grinding and chamfering, with a spindle diameter of ø200/500 mm and power of 4x29/2x5 kW.
- TRISTAN & ISOLDE IV: Features 4 vertical spindles and a chamfer machining station, with a cycle time of 6.5 seconds per connecting rod.
- TRISTAN & ISOLDE VI: Similar to the IV model but with 6 vertical spindles, offering a cycle time of 6 seconds per connecting rod.
- PARSIFAL 150/400: A plunge grinder with a vertical spindle, designed for cycle-by-cycle operations.
- PARSIFAL 500/500: Equipped with 2 opposite vertical spindles and planetary brushing units.
- MORGANE IV: Features 3 vertical and 1 horizontal spindle for high precision grinding.
- WOTAN III: A grinder with 3 horizontal spindles for internal and external profile grinding.
- High-performance spindles, direct drive, and modular frames made of grey cast iron and prestressed concrete.
- Automatic or semi-automatic loading systems and controlled processes.
- Electrical control by Siemens S7/1500/TIA systems.
- Consistent resolution of 0.001 mm across machines.
- Brushing Units: Offer variable or fixed speed options for surface finishing.
- Dressing Units: Maintain grinding wheel effectiveness with horizontal and vertical spindle options.
- Measuring Units: Provide manual and automatic measurement capabilities.
- Filtration Units: Ensure cleanliness and efficiency of the grinding process.
Catalog excerpts
CONSTRUCTION OF ADVANCED GRINDING SYSTEMS PRODUcT CATALOGUE
Open the catalog to page 1
Continuous through feed grinder, can be equipped with up to 3 vertical stations Sens de rectification de droite à gauche Pumping tank Manuelle Manual Automatique Automatic Performances - Resolution 0.005 mm or 0.001 mm (optional) - High performance spindles, direct drive - Modular rigid steel frame combined with prestressed concrete - Measurement and automatic servo - Additional brushing module - Can be combined with up to 3 stations continuously - Automatic, semi-automatic or manual loading
Open the catalog to page 2
Technical specifications Number of spindles Direct spindle drive (rpm) Width of machinable parts max. (mm) Height of machinable parts max. (mm) Abrasive tools Infeed (mm/min) Electrical control Continuous through feed flat surface grinder equipped with vertical spindle(s) + optional brushing unit(s) Simple operation Highly productive method for continuous through feed machining of surfaces, using corundum, diamond or CBN up wheels. Transported by a highly resistant composite belt, held by magnetic attraction (by mask or template for parts of non-magnetic material) the parts are guided between...
Open the catalog to page 3
Continuous through feed grinder, can be combined with up to 2 vertical stations Grinding and brushing or polishing Pumping tank Resolution 0.005 mm or 0.001 (optional) High performance spindles, direct drive Modular rigid frame of grey cast iron combined with prestressed concrete Measurement and automatic servo Additional brushing module Can be combined with up to 2 stations continuously Automatic, semi-automatic or manual loading
Open the catalog to page 4
Technical specifications Number of spindles 1 + brushing unit (option) Direct spindle drive (rpm) Width of machinable parts max. (mm) Height of machinable parts max. (mm) 100 Abrasive tools Infeed (mm/min) Electrical control Continuous through feed flat surface grinder equipped with vertical spindle(s) + optional brushing unit(s) Combined operations Highly productive method for continuous through feed machining of surfaces, using corundum, diamond or CBN cup wheels. Transported by a highly resistant composite belt, held by magnetic attraction (by mask or template for parts of non-magnetic material)...
Open the catalog to page 5
Continuous through feed grinder, can be combined with up to 3 vertical stations Grinding direction from right to left Grinding, polishing and brushing Pumping tank Resolution 0.001 mm High performance spindles, direct drive Modular rigid steel frame combined with prestressed concrete Measurement and automatic servo Additional brushing module Can be combined with up to 3 stations continuously Automatic, semi-automatic or manual loading
Open the catalog to page 6
Technical specifications Number of spindles 1 + brushing unit (option) Direct spindle drive (rpm) Width of machinable parts max. (mm) Height of machinable parts max. (mm) 120 Abrasive tools Infeed (mm/min) Electrical control Continuous through feed flat surface grinder equipped with 1 vertical spindle + 1 planetary brushing unit Combined operations Highly productive method for continuous through feed machining of surfaces using AL2O3 cup, diamond and CBN wheels. Transported by a highly resistant composite belt, held by magnetic attraction (by mask or template for parts of non-magnetic material)...
Open the catalog to page 7
Continuous through feed grinder, can be combined with up to 3 vertical stations Sens de rectification de droite à gauche Loading / unloading area Resolution 0.005 mm or 0.001 (optional) High performance spindles, direct drive Modular rigid frame of grey cast iron combined with prestressed concrete Measurement and automatic servo Additional brushing module Can be combined with up to 3 vertical stations continuously Automatic, semi-automatic or manual loading
Open the catalog to page 8
Technical specifications Number of spindles Direct spindle drive (rpm) Width of machinable parts max. (mm) Height of machinable parts max. (mm) 100 Abrasive tools Infeed (mm/min) Electrical control Total weight (t) Stock removal max. (mm) Continuous through feed flat surface grinder equipped with vertical spindle(s) + optional brushing unit(s) Combined operations Highly productive method for continuous through feed machining of surfaces, using corundum, diamond or CBN cup wheels. Transported by a highly resistant composite belt, held by magnetic attraction (by mask or template for parts of non-magnetic...
Open the catalog to page 9
SIEGFRIED 180/500 Tangential continuous through feed grinder equipped with 1 horizontal spindle Sens de rectification Spindle gauche de droite à Resolution 0,001 mm High performance spindles, direct drive Modular rigid steel frame combined with prestressed concrete Measurement and automatic servo Automatic, semi-automatic or manual loading
Open the catalog to page 10
Technical specifications Number of spindles Direct spindle drive (rpm) Width of machinable parts max. (mm) Height of machinable parts max. (mm) 100 Abrasive tools Infeed (mm/min) Electrical control Continuous through feed profile grinder equipped with 1 horizontal spindle Simple operation Highly productive method for continuous through feed machining of profiles using AL2O3 cup, diamond and CBN wheels. Transported by a highly resistant composite belt, held by magnetic attraction (by mask or template for parts of non-magnetic material) the parts are guided between rails and pass beneath the grinding...
Open the catalog to page 11
SIEGFRIED 180/500 Tangential continuous through feed grinder equipped with 1 horizontal spindle Sens de rectification de droite left Grinding direction from right toà gauche Resolution 0,001 mm High performance spindles, direct drive Modular rigid steel frame combined with prestressed concrete Measurement and automatic servo Automatic, semi-automatic or manual loading
Open the catalog to page 12
Technical specifications Number of spindles Direct spindle drive (rpm) Width of machinable parts max. (mm) Height of machinable parts max. (mm) Abrasive tools Infeed (mm/min) Electrical control Continuous through feed profile grinder equipped with 1 horizontal spindle Simple operation Highly productive method for continuous through feed machining of profiles using AL2O3 cup, diamond and CBN wheels. Transported by a highly resistant composite belt, held by magnetic attraction (by mask or template for parts of non-magnetic material) the parts are guided between rails and pass beneath the grinding...
Open the catalog to page 13All Linear Abrasive Engineering S.A. catalogs and technical brochures
PARSIFAL 500/5002 Pages
ISOLDE 500/5002 Pages
STAG 300/6002 Pages
STAG 180/500 Continuous2 Pages
STAG 180/5002 Pages
STAG 140/4002 Pages
- CNC grinding machine
- Workpiece grinding machine
- Surface grinding machine
- Vertical grinding machine
- Horizontal grinding machine
- High-performance grinding machine
- Brushing machine
- Direct-drive grinding machine
- Continuous grinding machine
- Multi-spindle grinding machine
- Metal profile grinding machine
- 3-spindle grinding machine
- Tangential grinding machine