ENGINE DRIVEN WELDERS Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K2382-4 K2382-5 See inside for complete specs Output Range 50-250A AC/DC 14-28V CV Welding 11,000 Watts Peak AC Generator 10,000 Watts Continuous AC Generator Rated Output - Current/Voltage/Duty Cycle 250A AC/DC CC/25V/100% 250A DC CV/25V/100% Number of Cylinders 2 XTra Performance! XTra Power! XTra Protection! Get all of the XTras needed for construction and maintenance work. That’s XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case. HP @ Speed (RPM) 23 @ 3,600 RPM Weight/Dimensions (H x W x D) 602 lbs. (273 kg) 29.9 x 21.5 x 42.3 in. (759 x 546 x 1074 mm) 36.2 in. (920 mm) To Top of Exhaust Tube APPLICATIONS Construction Maintenance and Repair Ranch/Farm FEATURES, CONT’D. 23 HP Kohler Gasoline Engine • 2 cylinder, 4 cycle overhead valve air-cooled design. • Electric fuel pump avoids vapor lock. • Oil drain extension for easy oil changes. • 12 gallon tank for extended run times. • Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling. Rugged Reliability • Welding and AC Generator Outputs Rated at 104ºF (40ºC). THE LINCOLN ELECTRIC COMPANY Publication E6.96 | Issue D­ te 10/10 Web Update: 03/13 a © Lincoln Global, Inc. All Rights Reserved. 22801 St. Clair Avenue • Cleveland, OH • 44117-1199 • U.S.A. PH: +1.216-481-8100 • www.lincolnelectric.com Totally Enclosed Case • Engine is fully protected. • 3 service access doors. • Low Noise – 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output. • Choose from painted or stainless steel roof, case sides and engine doors. Versatile AC/DC Welding • AC/DC welding output for a broad range of stick electrode types. • Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol™ for aluminum and other alloy welding. • MIG and flux-cored capable (with optional equipment). • Remote ready! 6-pin connector and local/remote switch for remote control operation. 11,000 Watts Peak Single-Phase AC Generator Power • Peak for motor starting. • 10,000 watts continuous power for generator, plasma cutter or inverter welder. • Lights, grinder, power tools. Two Year Extended Warranty Available in the U.S.A. and Canada

• XTra Performance! Rated 250 amps/25 volts for AC, DC and CV. All rated outputs at 100% duty cycle 104°F (40°C). • XTra Power! 11,000 watts peak AC generator power. Use peak power for motor starting. • AC/DC welding output for a broad range of stick electrodes, such as Lincoln Excalibur® 7018 (AWS E7018) and Fleetweld® 5P+ (AWS E6010). Also capable of MIG, flux-cored, and TIG welding. • XTra Power! 10,000 watts continuous AC generator power – Most continuous power in its class. Designed for high capacity needs such as a back-up generator, powering a plasma cutter or an Invertec® inverter welder....

1. Electric Fuel Gauge and Engine Hour Meter 2. 6 Position Output Range Selector 3. Circuit Breakers 4. 120 Volt AC Receptacles (NEMA 5-20R) 5. Output Stud Covers 6. Ground Stud 7. 120/240 Volt AC Full KVA Receptacle (NEMA 14-50R) 8. 6-Pin Remote Connector 9. Local/Remote Switch 10. Polarity Switch 11. Fine Output Control 12. Engine Choke Control (Stainless Steel Cable) 13. Engine Start Switch with Idler Control • dip stick, filters, spark plugs, etc. are easily accessed with left, right Oil and top engine doors. Left and right doors are removable for service. • onger engine life, reduced noise...

MACHINE SPECIFICATIONS Product Name K2382-4 Painted Roof, Case Sides and Engine Doors CV-Rated Output Current/Voltage/ Duty Cycle 11,000 Watts Peak 10,000 Watts Continuous 60 Hz Single Phase Ordering Information CC Rated Output Current/Voltage/ Duty Cycle K2382-5 Stainless Steel Roof, Case Sides, and Engine Doors 10,000 Watts Continuous AC Power Two 120V Duplex Receptacles 20A per Duplex 40A Total (4) Dimensions HxWxL inches (mm) D C constant voltage capability provides convenience and added safety when welding in electrically hazardous conditions. When welding, available auxiliary power will...

RECOMMENDED ACCESSORIES Welding Gas Cylinder/ LPG Tank Holder Holds welding gas cylinder or LPG tank (for products with LPG engine). For LPG: Use one holder for LPG tank and a second holder for welding gas cylinder. Both holders will attach to the K1770-1 undercarriage. Order K1745-1 GENERAL OPTIONS Power Plug Kit (20 amp) Provides four 120V plugs rated at 20 amps each, and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with common household receptacles. Order K802N Full-KVA Power Plug One dual voltage plug rated at 120/240V, 50 amps. (NEMA 14-50P)...

RECOMMENDED ACCESSORIES WIRE FEEDER OPTIONS PLASMA CUTTING Drive Roll and Guide Tube Kit For .035-.045 in. (0.9-1.1 mm) solid steel wire. Order KP1696-1 LN-25 PRO Wire Feeder Portable CC/CV unit for flux-cored and MIG welding with MAXTRAC® wire drive system. Includes gas solenoid and internal contactor. Order K2613-5 Tomahawk® 1000 Cuts metal using the AC generator power from the engine-driven welder. Requires the T12153-9 FullKVA Power Plug (1-Phase). Order K2808-1 POWER MIG® 180C Premium compact wire welder with continuous voltage control for MIG and flux-cored welding. 30 to 180 amp output...