ENGINE DRIVEN WELDERS Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K2857-1 See inside for complete specs Output Range 50-225A DC 15-25V CV Welding 10,500 Watts Peak AC Generator 9,000 Watts Continuous AC Generator Rated Output - Current/Voltage/Duty Cycle 225A DC CC/25V/ 40% 210A DC CC/25V/100% 200A DC CV/20V/100% Number of Cylinders 2 HP @ Speed (RPM) 23 @ 3,600 RPM Weight/Dimensions (H x W x D) 514 lbs. (233 kg) 29.9 x 21.5 x 42.3 in. (759 x 546 x 1074 mm) 36.2 in. (920 mm) To Top of Exhaust Tube Enclosed-Case Welder Construction Maintenance and Repair Ranch/Farm A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Ranger® 225 does a variety of basic welding jobs. And with 10,500 watts of peak AC generator power, it handles a variety of other jobs: lights, grinder, Lincoln Electric inverter, plasma cutter (separate air supply needed) or emergency power. At your service – everyday!™ FEATURES, CONT’D. 23 HP Kohler Gasoline Engine • 2 cylinder, 4 cycle overhead valve air-cooled design. • Oil drain extension for easy oil changes. • 12 gallon tank for extended run times. • Only 1.5 gallons/hour at 210 amps DC, 25V, 100% duty cycle. Visual fuel level gauge on both sides of unit. Rugged Reliability • Welding and AC generator outputs rated at 104ºF (40ºC). THE LINCOLN ELECTRIC COMPANY Publication E6.89 | Issue D­ te 01/12 Web Update: 04/13 a © Lincoln Global, Inc. All Rights Reserved. 22801 St. Clair Avenue • Cleveland, OH • 44117-1199 • U.S.A. PH: +1.216-481-8100 • www.lincolnelectric.com Totally Enclosed Case • Engine is fully protected. • 3 service access doors. • Low noise – 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output. Versatile DC Welding • Smooth DC welding output for a broad range of stick electrode types. • MIG, flux-cored and TIG capable (with optional equipment). 10,500 Watts Peak Single-Phase AC Generator Power • Peak for motor starting. • 9,000 watts continuous power for generator, plasma cutter or inverter welder. • Lights, grinder, power tools. Two Year Extended Warranty Available in the U.S.A. and Canada.

• Smooth DC welding output for a broad range of stick electrodes, such as Lincoln Excalibur® 7018 (AWS E7018) and Fleetweld® 5P+ (AWS E6010). Also capable of MIG, flux-cored, and TIG welding. • 10,500 watts peak AC generator power. Most peak power in its class. Use for motor starting. • Choose DC(+) for a deep penetrating arc or DC(-) for less penetration on thin sheet metal. • Rated 225 amps/25 volts/40% duty cycle and 210 amps/25 volts/100% duty cycle for CC and 200 amps/20 volts for CV. All rated outputs at 104°F (40°C). • Simple Output Range Selector can be used to select one of three amperage...

1. Engine Hour Meter 2. 4 Position Output Range Selector 3. Circuit Breakers 4. 120 Volt AC Receptacles (NEMA 5-20R) 5. Output Stud Covers 6. Ground Stud 7. 120/240 Volt AC Full KVA Receptacle (NEMA 14-50R) 8. Fine Output Control 9. Engine Choke Control (Stainless Steel Cable) 10. Engine Start Switch with Idler Control QUALITY AND RELIABILITY • dip stick, filters, spark plugs, etc. are easily accessed with left, right Oil and top engine doors. Left and right doors are removable, if desired, for service. • utomatic engine shutdown protection for low oil pressure. A • Adjust exhaust direction with...

MACHINE SPECIFICATIONS Product Name Ordering Information CC Rated Output CV-Rated Output Current/Voltage/Duty Current/Voltage/Duty Cycle Cycle 225 Amp DC Arc Welder 10,500 Watts Peak 9,000 Watts Continuous AC Power DC Constant Current 225A/25V/40% 210A/25V/100% Current Ranges 120-225A 70-145A 50-90A Max OCV @ 3700 RPM 80V RMS Dimension HxWxL inches (mm) 10,500 29.9 x 21.5 x 42.3 DC Constant Voltage(1) Watts Peak (759 x 546 x 1074) 200A/20V/100% 9,000 Watts Continuous 15-25V 60 Hz Single Phase To top of exhaust tube: 36.2 (920) Two 120V Duplex Receptacles 20A per Duplex 40A Total(4) D C constant...

RECOMMENDED ACCESSORIES Welding Gas Cylinder/ LPG Tank Holder Holds welding gas cylinder or LPG tank (for products with LPG engine). For LPG: Use one holder for LPG tank and a second holder for welding gas cylinder. Both holders will attach to the K1770-1 undercarriage. Order K1745-1 GENERAL OPTIONS Power Plug Kit (20 amp) Provides four 120V plugs rated at 20 amps each, and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with common household receptacles. Order K802N Full-KVA Power Plug One dual voltage plug rated at 120/240V, 50 amps. (NEMA 14-50P)...

RECOMMENDED ACCESSORIES WIRE FEEDER OPTIONS PLASMA CUTTING Magnum® 100SG Spool Gun Designed to easily feed 4 in. (102 mm) diameter 1 lbs. (0.45 kg) spools of .030 in. (0.8 mm) or .035 in. (0.9 mm) diameter SuperGlaze® aluminum MIG wire. Includes gun, adapter kit, .035 in. (0.9 mm) contact tips (qty. 3), gas nozzle, and a 1 lbs. (0.45 kg) spool of SuperGlaze® 4043 .035 in. (0.9 mm) MIG wire. Packaged in a convenient carrying case. Order K2532-1 Tomahawk® 1000 Cuts metal using the AC generator power from the engine-driven welder. Requires the T12153-9 Full-KVA Power Plug (1-Phase). Order K2808-1...