MULTI-PROCESS WELDERS Input Voltage 380/460/575/3/50/60 Input Current at Rated Output 3 Ph / 60% Duty Cycle: 37/27/22A Rated Output 450A/38V/60% Processes Stick, DC TIG, MIG, Flux-Cored, Arc Gouging Product Number K2882-2 Flextec 450 w/VRD® See back for complete specs FLEXible TEChnology . Output Range 10 - 500 Amps Weight/Dimensions (H x W x D) 125 lbs. (56.8 Kg) 18.8 x 14 x 26.5 in. (477 x 356 x 673 mm) This multi-process welder delivers up to 500 amps of welding power for a variety of applications, including construction and fabrication. It features an IP23 rating for outdoor operation and storage, and the latest inverter technology will save you real dollars on the utility costs associated with your welding operations. Construction Fabrication Automotive Production Education K2882-2 Base Unit Includes: P ower Source LF-72, LF-74 LN-10, DH-10 LN-15 LN-25 PRO, LN-25 PRO Dual Power LN-25 Pipe 115 volt input wire feeders are not supported. FEATURES CONT'D Variable Arc Control – In stick mode, vary the arc force to obtain the “soft” or “crisp” arc you want as conditions require. In CV modes, vary the pinch or inductance to control spatter, fluidity and bead appearance. Full-Featured Remote Control Capability – Use a foot pedal or hand control to remotely vary output up to 100 ft. (30.5 m) away. Desert Duty® Rated – Welding outputs are rated for extreme temperature operation up to 55°C. 22801 St. Clair Avenue • Cleveland, OH • 44117-1199 • U.S.A. PH: +1.216-481-8100 • www.lincolnelectric.com RECOMMENDED WIRE FEEDERS THE LINCOLN ELECTRIC COMPANY Publication E5.95 | Issue D­ te 08/13 a © Lincoln Global, Inc. All Rights Reserved. WHAT’S INCLUDED Flexible Multi-Process Capability – Including stick, Touch Start TIG® (DC), MIG, flux-cored welding and carbon arc gouging with up to a 3/8 in. (9.5 mm) carbon. The Future is Now – You no longer have to pay a price premium to gain the advantages of inverter technology over conventional welders. - Faster arc response means smoother arc action and more consistent bead appearance. - Low power consumption results in daily operational cost savings. - Enhanced portability – typically 50% less weight, size and footprint. VRD (Voltage Reduction Device™) reduces OCV (open circuit voltage) when not welding for added safety. Bright Digital Amp and Volt Meters – Easy to monitor, even in sunlight, and presettable for precise procedure control. Compact, Durable Case – Tough IP23 enclosure rating ensures the Flextec 450 will withstand extreme field environments. Selectable Hot Start – Turn it off for thin material or flip it on to get the extra starting amperage you need for thick, rusty or dirty material. Two Year Extended Warranty Available in the U.S.A. and Canada

KEY CONTROLS 1. Digital Amp Meter The VRD (Voltage Reduction Device­) provides an additional measure of safety, especially when working in an environment with a higher risk of electrical shock such as wet areas and hot, humid, sweaty conditions. The VRD® reduces the OCV (open circuit voltage) at the welding output terminals while not welding to less than 2 volts DC. Indicator lights will also signal when OCV during welding is above or below 30 volts DC. 3. Welding Process Mode 4. Hot Start Control 5. Local/Remote 6. Weld Output Terminal 7. Digital Volt Meter 8. Reversible Handles (Patent Pending)...

ENERGY SAVINGS The Result is: • Lower input current at the same output saves on input cable and fuse costs. • Lower power consumption results in annual operating cost savings. Flextec Energy Savings Input Current Draw @ 450A Output Power Factor (@450A Output) 45 40 Input Current (Amps) Typical Energy & Demand Costs(1) @ 450A Output Lincoln Electric Miller Electric Flextec 450 Dimension™ 452 42% Lower Current Draw The inverter technology of the Flextec 450 yields a higher efficiency and power factor compared to similar conventional power sources. Lincoln Electric Flextec 450 Lincoln Electric Dimension™...

RECOMMENDED ACCESSORIES GENERAL OPTIONS Multi-Process Switch(1) Easily switch between CC and CV processes. Order K3091-1 Deluxe Adjustable Gas Regulator & Hose Kit Accommodates CO2, Argon, or Argon-blend gas cylinders. Includes a cylinder pressure gauge, dual scale flow gauge and 4.3 ft. (1.3 m) gas hose. Order K586-1 TIG OPTIONS Pro-Torch™ TIG Torches A full line of air-cooled and water-cooled torches available. Request Lincoln publication E12.150 STICK OPTIONS Accessory Kit For stick welding. Includes 35 ft. (10.7 m) 2/0 electrode cable with lug, 30 ft. (9.1 m) 2/0 work cable with lugs, headshield,...