CRIMPING | SIDE FEED | SP2000 ABSOLUT! QUALIT " OE IN ^INLAND Finn-Power SP-series crimping machines with open C-frame structure are optimal for crimping any odd shape, bent or otherwise complex hose assemblies. SP2000 with 200 ton force is designed for heavier bent hose assemblies and small tubular components with large flanges. Please note that the images are for illustrative purposes only. The final product may vary in design, features or specifications. STANDARD FEATURES TECHNICAL DATA Crimping range (mm) 11 10-54 Crimping range (inch) 1) 0.39-2.12 Max. crimping force (tonnage) 200 Cycle time 10 mm (s) 2) Hose size ID (inch) Max. opening (mm) 4) Master die D/L (mm) Master die D/L (inch) Motor Power (kW/HP) Oil tank volume DIMENSIONS (LxWxH) Machine (mm) Hydraulic Unit (mm) Machine (inch) Hydraulic Unit (inch) WEIGHT (KG/LBS) Machine Hydraulic Unit SP2000 also available in following configurations: - S-model with enhanced cycle time - D-model with double head configuration (on request) See details from specific product cards. D-maridng 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10mm cycle. 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. Power supply cable not included. Foot pedal (part no 691563) QuickChange-tool (part no 691043) Pressure crimping ICC1 Step crimping ICC2 OPTIONS Foot pedal (Z-model) (part no 691563) Remote control unit R2 (double hand) Graphical quality control ICC4 Interface pack ETH (Communication TCP/IP & UDP) Bar Code Reader BCR Oil Condition Monitoring OCM DIE SET 20-SERIES DieSetNo D (mm) L (mm) Crimp. range (mm) In addition to the standard die sets, a wide range of special die sets is available on request. LILLBACKAUSA.COM ^ Lillbacka | FINN-POWER