OPTIONS Foot pedal (part no 691563) Mechanical back stop device (part no 705510) Electrical back stop device (part no 720196) Tool base (20 slots) with QuickChange-tool (part no 710579) Tool rack (16 slots) with QuickChange-tool (part no 692740) QuickChange-tool (part no 701049) Finn-Power P32SCC is strong, fast and reliable crimping machine for any service crimping need. This model turns hydraulics off to conserve energy, and to reduce workplace noise levels whenever the machine is idle. SCC control brings smartness to workshop crimpers via connectivity and visual user interface, including step crimping as a standard feature. Optional single foot pedal can be connected to workshop SCC models. TECHNICAL DATA Max crimping dia (mm/inch) 1) Max crimping dia with master dies (mm/inch) Max crimping force (tonnage) Hydraulic hose size (inch) Industrial hose size (inch) Max opening without dies (mm) Motor Power (kW/HP) 3) Foot pedal as an option. Tool rack with QuickChange-tool as an option. 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. 3) 3-phase/1-phase 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. In addition to the standard die sets, a wide range of special die sets is available on request.