P20X
P20X
- Maximum crimping diameter: 61 mm (2.40 inches) with standard dies, extendable to 94 mm (3.7 inches) with master dies.
- Maximum crimping force: 1370 kN (137 tonnage).
- Cycle time for 10 mm: 7.0 seconds (theoretical).
- Hydraulic hose size: 1 1/2 inches; Industrial hose size: 2.40 inches.
- Die set series: 20.
- Maximum opening: +25 mm; without dies: 109 mm.
- Motor power: 2.2 kW/3.0 HP (3-phase) or 1.5 kW/2.0 HP (1-phase).
- Oil tank volume: 7 liters.
- Dimensions: 525x515x564 mm (20.7x20.3x22.3 inches).
- Weight: 100 kg (243 lbs).
- Control system: MS.
- Die sets available in various sizes, ranging from 10 mm to 54 mm in crimping range.
- Special die sets available upon request.
- Mechanical back stop device.
- Tool base and rack with QuickChange-tool.
- QuickChange-tool available as an option.
- Version: 2.3.
- Images are illustrative; actual product may vary.
- Power supply cable not included.
Catalog excerpts
CRIMPING | SERVICE | P20X ABSOLUT! QUALIT P20X AFFORDABLE CRIMPER FOR SERVICE USE Entry level crimping machine for occasional service use and small workshops. For more demanding crimping needs please see P20NMS. TECHNICAL DATA with master dies (mm/inch) Max crimping force (tonnage) Hydraulic hose size (inch) Industrial hose size (inch) Max opening without dies (mm) Motor Power (kW/HP) 3 DIMENSIONS (LxWxH) WEIGHT (KG/LBS) 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. Power supply cable not included. Tool base and Tool rack with QuickChange-tool as an option. DieSetNo D (mm) L (mm) Crimp. range (mm) In addition to the standard die sets, a wide range of special die sets is available on request. FINNPOWER.FI LILLBACKAUSA.COM ^ Lillbacka | FINN-POWER
Open the catalog to page 1All Lillbacka Finn-Power catalogs and technical brochures
CM30CS1 Page
SP50001 Page
SP20001 Page
KC12001 Page
FP1751 Page
FP1701 Page
FP1451 Page
NC201 Page
CC221 Page
KC8001 Page
FP201 Page
P20NMS & P32NMS1 Page
P16HP1 Page
SP1001 Page
KC20001 Page
FP1401 Page
P32SCC1 Page
P32X1 Page
P32CS SCC1 Page
P20CS1 Page
P16AP1 Page
CM911 Page
CM75PH1 Page
CM30/CM351 Page
FP1651 Page
FS501 Page
Archived catalogs
P20X&P32X1 Page
p161 Page
King crimper2 Pages
FP series6 Pages
SP5000UC1 Page
Finn-Power UC control2 Pages
- Cutting system
- Metal cut-off machine
- CNC cutting center
- Automatic cut-off machine
- Cutting machine for industrial applications
- Knife cutting system
- Test stand
- Marking machine
- Tube cutting system
- Automated test bench
- Metal marking machine
- Rotary blade cutting center
- Three-phase cutting system
- Automatic crimping machine
- Plastic marking machine
- Industrial test bench
- Pipe crimping machine
- Pressure test bench
- Hydraulic crimping machine
- Valve test bench