OPTIONS Foot pedal (part no 676906) Mechanical back stop device (part no 705509) Tool base (20 slots) with QuickChange-tool (part no 710578) Tool rack with QuickChange-tool (part no 415663) QuickChange-tool (part no 691043) P20NMS DESIGNED FOR THE TOUGHEST ENVIRONMENTS Foot pedal as an option. Finn-Power P20NMS is strong, fast and reliable crimping machine for any service crimping need. This model turns hydraulics off to conserve energy, and to reduce workplace noise levels whenever the machine is idle. TECHNICAL DATA Max crimping dia (mm/inch) 1) Max crimping dia with master dies (mm/inch) Max crimping force (tonnage) Hydraulic hose size (inch) Industrial hose size (inch) Max opening without dies (mm) Motor Power (kW/HP) 3) Tool base (20 slots) Tool base and Tool rack with QuickChange-tool as an option. 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. 3) 3-phase/1-phase 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. In addition to the standard die sets, a wide range of special die sets is available on request.