*mydirectindustry

P20CS

Product catalog summary

Overview: The document provides technical specifications and options for the P20CS and Z-model crimping machines, designed for use in service vans. The CS models are battery-powered and available in left or right versions, while the Z-model features a separate hydraulic unit for improved weight distribution.

Specifications:

Dimensions: Crimping head measures 356x390x330 mm (14x15.3x13 inches), and the hydraulic unit is 249x457x326 mm (9.8x18x12.8 inches).
Weight: 68 kg (183 lbs).
Hose Length: 4 meters.
Max Crimping Diameter: 61 mm (2.40 inches) with standard dies, 94 mm (3.7 inches) with master dies.
Max Crimping Force: 1370 kN (137 tonnage).
Cycle Time: 13.9 seconds for a 10 mm cycle.
Motor Power: 1.6/2.2 kW (2.1/3.0 HP).
Oil Tank Volume: 5 liters.

Control and Models:

CS models are available in left (standard) and right versions, powered by 12V or 24V.
Z-model offers a separate hydraulic unit.

Options:

Tool rack with QuickChange-tool (part no 415663).
QuickChange-tool (part no 691043).
Mechanical back stop device (part no 705509).

Die Set 20-Series: The document lists various die sets with specific dimensions and crimping ranges, from 10 mm to 54 mm. Special die sets are available upon request.

Catalog excerpts

CS-models have been designed for service van use. Also available as Z-model with separate hydraulic unit for better weight balancing and space usage in service van. CS machines are battery powered with 12V or 24V crimping head on left as standard. Right version also available. MODELS CS left, standard (12V or 24V) CS right (12V or 24V) Z-model TECHNICAL DATA Max crimping dia (mm/inch) Crimping head (inch) Tool rack with QuickChange-tool (part no 415663) QuickChange-tool (part no 691043) Mechanical back stop device (part no 705509) Max crimping dia with master dies (mm/inch) Hydraulic unit (inch) Max. crimping force (tonnage) Weight (kg/lbs) Hose length (metres) Hydraulic hose size (inch) Industrial hose size (inch) Max. opening without dies (mm) 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. 3) 12V / 24V. Overload controlled In addition to the standard die sets, a wide range of special die sets is available on request.

Open the catalog to page 1