P16AP PORTABILITY FOR SERVICE Finn-Power P16AP is air pump operated hydraulic crimping machine for repair workshops and field use. Easy to use, light and compact in size, allowing to be carried to any location. Available also with hand pump (HP-model) and separate head/power pack configuration (Z-model). TECHNICAL DATA Max crimping dia (mm/inch) CONTROL Manual MODELS Z-model DIMENSIONS P16APZ (LxWxH) Crimping head (mm) Crimping head (inch) Hydraulic unit (inch) Max crimping force (tonnage) Weight (kg/lbs) Hydraulic hose size (inch) Hose length (metres) Industrial hose size (inch) Max opening without dies (mm) Motor Power Max crimping dia with master dies (mm/inch) 1) With standard dies. Crimping range can be increased with special dies. 2) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. In addition to the standard die sets, a wide range of special die sets is available on request.