NC20 ABSOLUTE QUALIAE IN INLAND Please note that the images are for illustrative purposes only. The final product may vary in design, features or specifications. Finn-Power NC-machines have proven to be the most reliable and widely used nut crimping machines in the industry. NC-machines provide fast and accurate crimping for fitting manufacturing. NC20 can be used also for other applications with short crimping length eg. connectors, small hoses, rings, tubes and sensors. Adjustable back stop enables quick set up for different products. A special centering pin, selected according to ferrule size, can be used during the crimping. Also available as Z-model with separate crimping head and hydraulic unit. TECHNICAL DATA DIMENSIONS (LxWxH) Crimping range (mm) 11 12-49 Crimping range (inch) 1) 0.47-1.93 Max. crimping force (tonnage) 50 Cycle time 10 mm (s) 2) 1.5 Hose size ID (inch) 1 1/4 Max. opening without dies (mm) 117 Master die D/L (mm) 99/22 Motor Power (kW/HP) 3.0/4.0 Z-model hydraulic unit (mm) 597x436,5x651 Z-model head (inch) 12.6x13.4x17.2 Z-model hydraulic unit (inch) 25.6x17.2x23.5 WEIGHT (KG/LBS) Power supply cable not included. Z-model hydraulic unit 103/227 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10mm cycle. 3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. STANDARD FEATURES Foot pedal (Standard) Mechanical back stop device Pressure crimping ICC1 Step crimping ICC2 OPTIONS Foot pedal (Z-model) (part no 691563) Auto greasing G3 Oil Condition Monitoring OCM Quality control ICC3 Graphical quality control ICC4 Remote control unit R2 (double hand) Interface pack ETH (Communication TCP/IP & UDP) A3 signal DIE SET NC20-SERIES DieSetNo D (mm) L (mm) Crimp. range (mm) In addition to the standard die sets, a wide range of special die sets is available on request.