CRIMPING | HEAVY-DUTY | KING CRIMPER 2000 KING CRIMPER 2000 THE KING OF CRIMPERS The King Crimper’s extremely large opening and enormous crimping force coupled with the world’s most advanced crimping control means there are literally no limitations to what it can crimp. The King Crimper’s robust frame design ensures consistent repeatability. The ICC Control on a swing arm and remote control device allows the operator to crimp hard to crimp objects and while keeping them safe and in control of the process. The primary markets for ‘the King’ are oil & gas and transportation for crimping pipes, tubes and fittings. TECHNICAL DATA Max crimping dia (mm/inch) 1) Max crimping dia with master dies (mm/inch) STANDARD FEATURES Foot pedal (part no 691563) Adapter dies for 170-series die sets, L300 (part no 705485) Auto greasing G3 Remote control unit R1 Pressure crimping ICC1 Step crimping ICC2 Quality control ICC3 Graphical quality control ICC4 Interface pack ETH (Communication TCP/IP & UDP) Camera with 7” display Bar Code Reader BCR OPTIONS Oil Condition Monitoring OCM Adapter dies for 160-series die sets, L220 (part no 404916) Oil cooler J3 Max. crimping force (tonnage) Hydraulic hose size (inch) Industrial hose size (inch) Max. opening without dies (mm) Motor Power (kW/HP) Camera with display as a standard feature. Remote control unit as a standard feature. DIMENSIONS (LxWxH) Machine (mm) Machine (inch) Hydraulic Unit (inch) WEIGHT (KG/LBS) Machine Hydraulic Unit 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. 3) See table for die set data. 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. 5) With adapter dies. In addition to the standard die sets, a wide range of special die sets is available