CONTROL ICC (7” touchscreen) or SCC (5” touchscreen) STANDARD FEATURES QuickChange-tool (part no 691043) Electric backstop device (part no 705183) Mirror (part no 404136) Pressure crimping (ICC only) Step crimping OPTIONS (SCC & ICC) Foot pedal (part no 691563) Mechanical back stop device (part no 704920) Interface pack ETH (communication TCP/IP & UDP) Oil cooler J3 ** Combi unit (crimping and hydraulic unit combined) Pinning support mandrel Camera with 7” display ** Will have impact on motor size, hydraulic unit dimensions and weight. SPEED, PRECISION AND QUALITY FP20 is the first step towards high scale production with automatic quality control and other advanced options. FP20 is the powerful little brother of our famous FP120. It’s ideal for high volume production up to 1 1/2” 4-wire hydraulic hoses. It supplied with built-in die storage (14 slots) and Quick Change-tool as standard. Smart die rack SDR (8 slot) Quality control ICC3 Graphical quality control ICC4 Auto greasing G3 Bar Code Reader BCR Speed adjustment ** Oil Condition Monitoring OCM Industry 4.0 A3 signal ** Will have impact on motor size, hydraulic unit dimensions and weight. FP20 is available with separate hydraulic unit or as a compact model. TECHNICAL DATA Max crimping dia (mm/inch) 1) Max crimping dia with master dies (mm/inch) Max. crimping force (tonnage) Hydraulic hose size (inch) Industrial hose size (inch) Max. opening without dies (mm) Motor Power (kW/HP) Electric backstop device as a standard feature. Die sets can be installed into the master dies with a QuickChange-tool one set at a time. FP20ICC and FP20SCC are supplied with built-in die storage (14 slots) DIMENSIONS (LxWxH) Machine (mm) Machine (inch) Hydraulic Unit (inch) WEIGHT (KG/LBS) Machine Hydraulic Unit Compact setup ACCORDINGTO TOTHE THEFITTING. FITTING. **ACCORDING 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10mm cycle. 3) See table for die set data. 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. In addition to the standard die sets, a wide range of special die sets is available on r